Results 1 to 4 of 4

Thread: 3.6.26 Auto Trans Parameters Missing

  1. #1
    Tuner in Training
    Join Date
    Jul 2017
    Location
    Central Texas
    Posts
    31

    3.6.26 Auto Trans Parameters Missing

    Even though I am in advanced mode, under the transmission tab, there are two tabs, General and Manual, I do not see any other automatic transmission parameters under the transmission tab. Under the engine tab and torque management, I do not see or have found automatic shift parameters.

    I have opened and closed my tune, removed and re-installed HPT but no luck, am I missing the obvious?
    Last edited by 243; 07-27-2017 at 06:57 AM. Reason: Wrong version in title
    2010 2500HD 4x4 6.0 Stock
    1978 Cherokee w/ 2004 L59, 4L60, NP241C Swap in Progress

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    Post your file.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner in Training
    Join Date
    Jul 2017
    Location
    Central Texas
    Posts
    31
    Here is the stock tune and my first edit and flash with very minor changes to torque values under engine and torque management.
    Attached Files Attached Files
    2010 2500HD 4x4 6.0 Stock
    1978 Cherokee w/ 2004 L59, 4L60, NP241C Swap in Progress

  4. #4
    Tuner in Training
    Join Date
    Jul 2017
    Location
    Central Texas
    Posts
    31
    Mr. Bill, I did not perform the read correctly the first time, I tried again and the tabs are visible now. Thanks!
    2010 2500HD 4x4 6.0 Stock
    1978 Cherokee w/ 2004 L59, 4L60, NP241C Swap in Progress