Results 1 to 4 of 4

Thread: Barometric Pressure Sensor

  1. #1
    Senior Tuner
    Join Date
    May 2016
    Posts
    1,134

    Barometric Pressure Sensor

    I just tuned an Ecoboost F150 and barometric pressure was logging 0 the entire time. The truck didn't have a CEL or anything and I did a quick test with my friends truck of the same year and it logged barometric pressure fine. Any ideas?

  2. #2
    Advanced Tuner LastPlace's Avatar
    Join Date
    Jul 2016
    Posts
    613
    No enough info.

  3. #3
    Senior Tuner
    Join Date
    Jan 2013
    Location
    Hawaii
    Posts
    2,101
    You could have been on the BAR or Mpa unit and have no decimal places to actually see anything but 0.

  4. #4
    Senior Tuner
    Join Date
    May 2016
    Posts
    1,134
    Quote Originally Posted by murfie View Post
    You could have been on the BAR or Mpa unit and have no decimal places to actually see anything but 0.
    Great idea. I'll check when I get my laptop later. I was thinking the entire time that it's working because my graphs and everything displayed boost like normal so it would have needed barometric pressure to subtract out. Couldn't remember if maybe it defaulted to standard atmospheric pressure or not though.