Page 1 of 3 123 LastLast
Results 1 to 20 of 50

Thread: HP Tuners - VCM Suite 3.6 Released

  1. #1

    Exclamation HP Tuners - VCM Suite 3.6 Released



    HP Tuners VCM Suite 3.6 Official Release

    HP Tuners presents VCM Suite 3.6, the latest software now available for download! We have included many updates in this release ranging from newly supported vehicles, updated definition tables, additional controller functions and a wider range of scanning abilities.

    To view the latest supported vehicles list, click here.

    The latest version of VCM Suite 3.6 is available for download here.





    VCM Scanner Updates

    General
    • Diagnostics and Info Readiness Tests now list tests that are Not Supported.

    Scanning
    • Fixed a bug where the scanner would randomly stop after an arbitrary length of time.

    Parameters
    • More parameters added,

    Controls & Special Functions
    • More controls & special functions have been added for many newer vehicles.
    • Several issues on GM vehicles have been resolved, including VATS Relink, Transmission Gear control...

    For the full VCM Scanner change log, please see the following link: https://www.hptuners.com/help/VCM-Sc...changelog.html





    VCM Editor Updates

    General
    • More controllers have been added.
    • GM T87A 8-Speed & 10-Speed support.
    • GM FSCMs support.
    • GM CCM support.
    • Ford 2017 F150 / Raptor support.
    • Ford 10-Speed support.
    • Ford 2017 Powerstroke transmission support.
    • Ford 6.0L Diesel FICM support.
    • Ford aftermarket supercharger calibrations.
    • Ford FRPP calibrations supported.
    • Ford Track Key support.
    • Ford Crate Engine support improved.
    • Dodge/Chrysler/Jeep/RAM ZF8 8-Speed support.
    • Dodge 6.4L Crate Engine support.

    Files
    • Improved Tune open/edit/save performance.

    Editing
    • GM Virtual Torque.

    Parameters
    • More parameters have been added.
    • User Definable Parameters

    Writing
    • New and improved 2017 GM read/write process.

    Licensing
    • Licensing prompt has switched from file open to file save, export or write.

    Misc
    • Many bugs have been fixed.

    For the full VCM Editor change log, please see the following link: http://www.hptuners.com/help/VCM-Edi...changelog.html




  2. #2
    Advanced Tuner
    Join Date
    Jun 2007
    Location
    Finland, Europe
    Posts
    371
    Very good!

  3. #3
    Advanced Tuner
    Join Date
    Nov 2015
    Location
    In a sandpit
    Posts
    398
    -I'm downloading it as I type ...
    99 TA, Texas Speed LS376, PRC heads, 233/239 cam, Fast 92mm, 95mm TB, card style MAF, Tick TR6060, Strange 4.11 12 bolt axle & clutchpack diff, Strano springs/dampers, Vette 18" wheels, Vette disks, CTS-V calipers, 16lb flywheel, long tube headers, no cats.

  4. #4
    Wow, thanks HP tuners for the new update

  5. #5
    Moderator
    Join Date
    Mar 2014
    Location
    Greensboro, NC
    Posts
    6,161
    Nice. I like the new flat logo design also.

  6. #6
    Tuner in Training
    Join Date
    Jan 2013
    Posts
    32
    Hptuners make a beta version for me and my pid

    3.6 include this beta ??

  7. #7
    Moderator
    Join Date
    Mar 2014
    Location
    Greensboro, NC
    Posts
    6,161
    Should be

  8. #8
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,643
    3.6 includes everything that was in the 3.5 beta.
    We got this guy Not Sure, ...

  9. #9
    Senior Tuner GHuggins's Avatar
    Join Date
    Jan 2015
    Location
    Cashiers, NC
    Posts
    3,005
    Possibly a stupid question, but I thought that 3.6 was going to include the Ford VVE and torque calculations in the editor - is this something that's going to be added in upcoming updates? Also have the pids for the whipple and roush OS's been added?

    Thank You
    https://www.facebook.com/passionperformanceauto/
    2013 ZL1 - Making 761 RWHP & 703 RWTQ with cam only internal engine mod / Built engine - 416 stroker, ported heads, full exhaust, 20psi out of a Magnuson Heartbeat, 108tb - Made 851 RWHP and 854 RWTQ on pump 93 and 936 RWHP and 912 RWTQ on E60

    2010 Corvette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on pump 93

  10. #10
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    495
    Quote Originally Posted by GHuggins View Post
    Possibly a stupid question, but I thought that 3.6 was going to include the Ford VVE and torque calculations in the editor - is this something that's going to be added in upcoming updates? Also have the pids for the whipple and roush OS's been added?

    Thank You
    If you still have a PID issue with 3.6, please send us an email and attach the tune file in question.

  11. #11
    Potential Tuner
    Join Date
    Feb 2016
    Location
    Tennessee
    Posts
    8
    Still no support for the 14-15 Cruze diesels (very small market segment, I know)

  12. #12
    What is improved about the 2017 read/write process?

  13. #13
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    495
    Quote Originally Posted by LT1Z View Post
    What is improved about the 2017 read/write process?
    You no longer need to email infologs to support. Try to read the vehicle, wait 30 minutes, try again and it should work.

  14. #14
    Quote Originally Posted by GHuggins View Post
    Possibly a stupid question, but I thought that 3.6 was going to include the Ford VVE and torque calculations in the editor - is this something that's going to be added in upcoming updates? Also have the pids for the whipple and roush OS's been added?

    Thank You
    I was also under the same impression

  15. #15
    Senior Tuner
    Join Date
    Mar 2012
    Location
    Detroit, MI
    Posts
    1,021
    I noticed it said GM CCM support.. is this Cabin Control Module? Any idea what years/cars?
    2010 Camaro LS3 (E38 ECU)
    Whipple 2.9L, kit injectors, supplied MSD Boost-A-Pump, stock pump
    JBA Axle Back
    ZL1 Wheels/Tires

  16. #16
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    495
    Quote Originally Posted by 10_SS View Post
    I noticed it said GM CCM support.. is this Cabin Control Module? Any idea what years/cars?
    This is the chassis control module in 2015-2016 Corvettes.

  17. #17
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Sydney Australia
    Posts
    510
    does 3.6 do a firmware upgrade on the MVPI?

  18. #18
    Don't quote me as I'm going of memory a good couple of years back, but I believe the last firmware update was v120 that worked with the last of the 3.4 and 2.24.1170 ish+. I haven't got to 3.6 as yet, but I still have my 2.24 and 3.4.x side by side on same firmware. Probably doesn't help you though.

  19. #19
    Advanced Tuner
    Join Date
    May 2016
    Posts
    503
    Quote Originally Posted by Engineer@HPT View Post
    This is the chassis control module in 2015-2016 Corvettes.
    Any chance this would work or be able to be made to work for newer trucks? They have stability control problems when tire size is increased too much.

  20. #20
    HPT Employee Engineer@HPT's Avatar
    Join Date
    Jan 2015
    Location
    fecadefa
    Posts
    495
    Quote Originally Posted by VYSSLS1 View Post
    does 3.6 do a firmware upgrade on the MVPI?
    There is no firmware update with this release.