my question has possible already been answered but, in channels i have intake manifold absolute pressure (SAE) , and manifold absolute pressure - 3 bar and map in chart vs time.my question is why do they all have a different amount eg.. IMAP=105kpa map3bar= 152kpa and in the chart vs time it has 129kpa..... is the problem because im login the 1 bar channel causing the chart vs time to average between the 2 or is have i done somthing else wrong...Thanks
Possible.
Only log the map channel that goes with the map sensor you are running. If you change it to only view the 3 bar map channel because you are running a 3 bar map and it still reads 154kpa KOEO then you may have other problems or incorrect settings.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Reply With Quote