2000CHEV PICK FERNANDO.hpt can somebody check my tue if is corrct thanks
2000CHEV PICK FERNANDO.hpt can somebody check my tue if is corrct thanks
Correct for what?
Yeah, not sure what you're asking about being correct. Your question is too vague and not enough information on what you are doing or what is done to the vehicle.
Just something to note, set the MAF dtc's to fail on first error for speed density tuning and I wouldn't set your PE enable to 0% throttle either, you're going to be in and out of PE all the time when your only other delay settings in 55 kpa on the MAP. Stick to something like 50% or higher.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.