Results 1 to 3 of 3

Thread: DOD engine swap won't work

  1. #1
    Potential Tuner
    Join Date
    Feb 2017
    Posts
    4

    DOD engine swap won't work

    Hi all, been able to put about 500 miles on an LMG 5.3 from a 2010 with a 6l80 into a 2003 4wd s10. I'm running an e67 with a colorado tune. Engine runs great but can't figure out why the DOD won't kick on.

    It is enabled in the tune, but I'm not sure if the enable parameters mean what I think they mean. I've tried lowering the vac enable a bunch, and max TPS up a ton and it still won't activate. I haven't found an actual vacuum pid in the scanner and there's about a dozen tps signals to choose from. I'm not exactly sure what the computer is actually looking for.

    Are there other things that will inhibit DOD that aren't shown in the fuel tab. I'm pretty new to hptuners so any ideas on how to troubleshoot would be greatly appreciated.

    Thanks all

  2. #2
    Advanced Tuner
    Join Date
    Jan 2015
    Posts
    563
    is your cot enabled?

  3. #3
    Potential Tuner
    Join Date
    Feb 2017
    Posts
    4
    Yes COT is enabled.