-
Tuner in Training
2006 SKIM ON with Insight, Off with MPVI
OK so hopefully someone can explain this to me.
I upgraded an old Insight CTS2 to an Insight Pro to be able to pull stock tunes before I took the plunge with buying VCM Suite. I pulled tunes from a 2006 Cummins ECM that I'm using for a Fummins conversion. The tunes compare exactly the same except that the SKIM is Enabled with the tune pulled with the Insight and disabled with the tune pulled with the MPVI.
I have not downloaded a custom tune to the ECM before, and AFAIK its a stock 2006 Cummins ECM.
Why would one tune have the SKIM enabled and the other have it disabled?
FWIW I need the SKIM disabled since I'm using it in a stand alone application.
-
Tuner in Training
File pulled with MPVI
2006 Cummins STOCK MPVI.hpt
File pulled with Insight (delete the .hpt to extension and make it a . epq to open in HPT)
2006Cummins.epq.hpt
Last edited by hydrocarbon302; 02-25-2017 at 10:15 PM.
-
Potential Tuner
I'm having similar trouble now and Edge engineers are working on it. If I pull a file with CTS I get a checksum error, if I pull it with HPT its fine.