Results 1 to 4 of 4

Thread: RPM not logging correctly?

  1. #1
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,163

    RPM not logging correctly?

    It seems to work fine until Im WOT. Ill do a full pull to 7500 and the log will show a max of 63-6500 area. Ill have to take another on my ride home to show it. But, it will show me still holding the pedal down but the RPM peaks (less than actual, again around 6300ish) and drops while still showing 100% pedal. Any ideas?

  2. #2
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,163
    This is a 2nd and 3rd gear pull. 2nd I ran out to almost 7500, 3rd I left off just after 7k. You can see the RPM stops at 6300 in 2nd but if you look at the blip in the EQ cmd after the RPM peak, thats where it actually shifted. The RPM isnt recording fully to red line in 2nd. Makes no sense..

    Rev1.jpg

    rev2.jpg

  3. #3
    HP Tuners Owner Keith@HPTuners's Avatar
    Join Date
    Sep 2002
    Location
    Chicago, IL
    Posts
    6,394
    You're logging so many parameters, your resolution won't be that good.

    Decrease parameters, or decrease specific parameter resolution.
    We got this guy Not Sure, ...

  4. #4
    Senior Tuner BackyardTurbo_FTW's Avatar
    Join Date
    Jul 2009
    Location
    East Suckburg, PA
    Posts
    1,163
    Too thorough, got it lol. I can get rid some now that I know which variants I have