Hey guys, have a 2011 F-350 dually with a 6.2 mated to a 6R140. Trans is having some issues with setting a incorrect 3rd gear ratio code. Been trying to add line pressure via the editor but not having any luck at all. I dont believe we have the tables we need yet, at least with this OS. Anyone had any experience with this? We can take a Genisys scan tool and command firm shift and it shifts like a TH400, bangs every gear off like a champ. But in the editor there are only tables for Line Boost Pressure, Boost Time, and Clutch Fill Time. Sorry, I dont have the stock tune to post at the moment, other computer is elsewhere at the moment. Thanks for any replies.