Cant get it to install in windows 10. Had to reinstall the last update. Installed fine on my old windows 7 laptop
Cant get it to install in windows 10. Had to reinstall the last update. Installed fine on my old windows 7 laptop
Last edited by Mongorat427; 11-15-2016 at 06:58 AM.
You guys need to do subaru
Just bought a new wrx sti and looking around nothing comes close to what u guys have
I find hp tuners so easy to work with
May I ask is anyone's VVE system working..... every tune I open it just has a curved slope, 4000+ numbers.... any tune...... it's weird, at first it showed my stock tune fine and then all other tunes weird numbers......... if i change mine it goes weird.
I am running 3.4.8 ......... it went odd sometime during 3.2 i think....... see picture attached.
2017 Toyota Kluger - 10.1" Android Custom Head Unit, Rockford Fosgate Speakers, 85kg Roof Racks. Prev: 2009 Cammed VE SS Sedan, DOD Delete, 210/218 550', RAMJet OTR, HiFlowCats, IQ System, Amp/Speakers.
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
Cam angle off set PID doesnt seem to be working for me. Those of use who have Gen 1 SBC and use gen 3 ecm . Our distributors hold our cam sensor. Cam angle was suppose let the user know where the cam shaft was in relation to the distributor or crank one of them. Other software ie tech 2 calls it CMP .
The 4 credits for 2017 vehicles, will that be dropped down to 2 credits eventually? If not, I'm curious what the reasoning is for the 4 credits?
Thanks!
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Yes RTT is only available on P01/P59, this likely won't change.
There were several requests in this thread that were addressed http://www.hptuners.com/forum/showth...Suite-3-1-BETA
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
What about remote tuning? Meaning, once the key has been generated for the vehicle by the person getting his car remote tuned, will the tuner that is tuning it remotely have to pay for 4 credits to license the vehicle also even though there is no need for the additional charge?
Thanks.
Last edited by mike72678; 11-15-2016 at 02:02 PM.
2010 Vette Stock Bottom LS3 - LS2 APS Twin Turbo Kit, Trick Flow Heads and Custom Cam - 12psi - 714rwhp and 820rwtq / 100hp Nitrous Shot starting at 3000 rpms - 948rwhp and 1044rwtq still on 93
2011 Vette Cam Only Internal Mod in stock LS3 -- YSI @ 18psi - 811rwhp on 93 / 926rwhp on E60 & 1008rwhp with a 50 shot of nitrous all through a 6L80
~Greg Huggins~
Remote Tuning Available at gh[email protected]
Mobile Tuning Available for North Georgia and WNC
Does this completely replace 3.2 and 3.3? I noticed 3.4 is the only thing available on the customer page. Great work guys. Now I'm going to have to bug about getting my 2003 E55 AMG supported.
Yes, replaces 3.2 and 3.3 (beta)
awesome
I was expecting 04 dodge support today I basically was told to get fucked by support that they " DO NOT PLAN TO ADD ANY OTHER PARAMETERS" all the 04 545rfe are on there, but they are not. It doesn't read knock or injectors and they don't plan to. it was suggested that I sell the used interface.... so I am shit out of luck. I waited to start my engine project until I knew I had a way to tune it. now I'm back to square 1. wasted the money. I guess if I had and LS this would be OK or one of the 10 ppl who already have purchased a 2017 and are ready to alter it. I am on a mission to spread this and the lies that I was told in the beginning in order to sell it to me. 8 grand into a motor that I have no idea now how I will be able to make it run.
Last edited by arottmann; 11-15-2016 at 03:49 PM. Reason: mispelling
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
this should be said up front. especially the tranny