Results 1 to 8 of 8

Thread: AEM 30-0333 wideband data logging problem

  1. #1

    AEM 30-0333 wideband data logging problem

    Problem loging AEM 30-0333 wideband with the MPVI internal logging.
    Works fine when using a PC. Does not log the channel when using the interface logging funtion.
    Channel config loaded in the interface and log file:
    2007Z06#10TRACK.Channels.xml
    07 Z06 Log_NW102+_Katech-V6.6_VE5.1_LS9in_OL_TRACK_9-5-16.hpl

  2. #2
    Moderator
    Join Date
    Mar 2014
    Location
    Raleigh, NC
    Posts
    6,347
    How is it connected?

    If it's connected via the OBD port then your channel setup is wrong. You need to add "WB EQ Ratio 1 (SAE)" to the list of channels you're logging (make sure it's the one for the wideband, should be the only one . That will be the wideband. No need to mess with MPVI inputs, transforms, etc. Just log that one thing and that's it.










    Post a log and tune if you want help

    VCM Suite V3+ GETTING STARTED THREADS / HOW TO's

    Tuner by night
    CPX Tuning
    2005 Corvette, M6
    ECS 1500 Supercharger
    AlkyControl Meth, Monster LT1-S Twin, NT05R's
    ID1000's, 220/240, .598/.598, 118 from Cam Motion

    2007 Escalade, A6
    Stock

  3. #3
    Tuner
    Join Date
    Oct 2011
    Location
    Australia
    Posts
    175
    Cheers mate, just bought one.

  4. #4
    Potential Tuner
    Join Date
    Nov 2015
    Posts
    1
    Has anyone else ran into this issue? The AEM 30-0333 logs correctly with my laptop connected, but not with just the MPVI Pro Interface logging (without laptop). I'm logging the channel "WB EQ Ratio 1 (SAE)" as well. Thoughts anyone?

    *edit for more info*

    The AEM 30-0333 works through the canbus, and connects directly thorough the OBD-II port. Odd that it works when laptop is connected, but not when trying to log using just the interface.
    Last edited by Sweck; 05-24-2017 at 01:01 PM.

  5. #5
    Moderator
    Join Date
    Mar 2014
    Location
    Raleigh, NC
    Posts
    6,347
    I've never tried logging it with just the interface. I assume you mean via standalone logging?
    Post a log and tune if you want help

    VCM Suite V3+ GETTING STARTED THREADS / HOW TO's

    Tuner by night
    CPX Tuning
    2005 Corvette, M6
    ECS 1500 Supercharger
    AlkyControl Meth, Monster LT1-S Twin, NT05R's
    ID1000's, 220/240, .598/.598, 118 from Cam Motion

    2007 Escalade, A6
    Stock

  6. #6
    Updates? Solution?

  7. #7
    Update from support: This is a known issue, there is no ETA on a fix for this issue at this time..

  8. #8
    Advanced Tuner
    Join Date
    Jun 2007
    Location
    Close to my Z06
    Posts
    271
    Was hoping the 3.7 beta would have the fix