looked everywhere but cant find Aircharge (G) so i can log WOT Spark Base anyone know? in CMR it is mg/cycle/cyl
vehicle is Jeep Wrangler 2012
looked everywhere but cant find Aircharge (G) so i can log WOT Spark Base anyone know? in CMR it is mg/cycle/cyl
vehicle is Jeep Wrangler 2012
Yeah that would help. Attached. The aircharge parameter shown in my table does not go down, it only reads the spark on top line.
Thanks Jggregory99 for the reply. Thats exactly what i have. it doesnt fill the graph it just populates the top row
Post log and layout. Most likely you're not logging the correct thing.
Open Channels in the VCM Scanner click add channel.... Enter Aircharge in the search parameter.....If it is not highlighted in blue it is not active. Double click to add..
to close this out. thank you jggregory99 that was it. it was not highlighted so it was not logging that parameter. thank you for the input it was a long night
I have the latest VCM Editor 4.4.4 but sadly I cannot find Aircharge when I search for it in Add Channel section, was it removed?
Ok, so looks like some of the channels are not always available, looks like a bug with MPVI2 or the VCM Scanner software. If I disconnect / connect to the car with ignition on then on every 5th or so attempt it can actually read all the properties the car can provide. This is really annoying as I need to constantly disconnect / connect to get it right and be able to log Aircharge.