Hi, working with VCM Scanner 3.0 I can't find the channel "cyl air mass" anymore. Has the number of channels been reduced? Thanks in advance, Stefan
Hi, working with VCM Scanner 3.0 I can't find the channel "cyl air mass" anymore. Has the number of channels been reduced? Thanks in advance, Stefan
I have an open post about missing channels in the L67 scanner open. Bill replied and I believe he is looking into it. I am also not able to add KR, commanded AFR, MAF Htz to the channels. Also I cannot enter VCM controls. Do you have these same issues?
Hi Knielsen, offline I can add KR. I saw connected to the car, that for example rpm first could be added and then disappeared.
There are definitely channels missing. I neither can find MAF Htz, which I would need urgently.
good - then it is not just me. did you see my post in the scanner section that bill replied to this am?
Just be aware that some channels are now math parameters, meaning you need certain things in the channel display for it to show up.
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
I noticed that also, glad someones looking into it. Was regreting the upgrade.
so just down load it again?
didnt work for me. I really need to sell and get a standalone
3.2 to the rescue. hope it works
I still can't find how to log MAF error in 3.x. In the old 2.x i could just create a custom pid, 114 + 116 (ltft + stft) and add that to the histograms. I can't even find histograms, only a few preset graphs.
Any help would be great.....
2006 Cobalt SS Supercharged - 3xx whp. *Gone*
2014 Camaro M6 - Too slow.