I can't seem to get my Suite scanner to log Pilot timing. I found it in the parameters but i can't find in the channels where to select it. What am i missing? Thanks in advance.
I can't seem to get my Suite scanner to log Pilot timing. I found it in the parameters but i can't find in the channels where to select it. What am i missing? Thanks in advance.
What year is yours? I don't think it works on the 03 early 04's. My 03 doesn't anyway.
Have you reviewed this thread?
http://www.hptuners.com/forum/showth...er-Information
-Matt
I have and I still don't have any pilot info coming through, I can only select it, just don't see any data.
I experience the same thing with my truck. It used to work (from November to mid December), but quit working at some point after a HP Tuners software update.
Just for clarification, what year truck are you working with?
Mine is a 2005 Automatic, OS ID 25325353AI, CM848E ECM.
Mine also does not work. Maybe we need to re-patch? I always see pilot qty, so that lets me know when I break it or not, but I've never seen pilot timing or correction reason come up.
Last edited by Turbo_Mike; 05-06-2016 at 02:45 PM.
2003 305/555 QCSB Cummins
Piston/rod/sleeve/fire ring/dual CP3/300 overs
Super Stick NV5600
S366/S480
I do see pilot qty but no timing or correction.
2003 QC Long Flat Bed 6spd, Intake, Exh, Heavy Valve Springs, HE351VE Arduino
Did this ever get resolved being able to log pilot inj timing on the 03-04 trucks? I am running the current 3.4.46 software, I load a channel list that has pilot inj timing included, but connecting to truck it disappears and does not log. Capture2.PNGCapture1.PNG
2003 Cummins SRW LWB QC 4x4 NV5600 305/555
I don't think this is limited to 03-04 trucks, as I see the same thing happen on my 05. I can only suspect that HP Tuners engineering found that there was something off about what was being logged, and as such removed it from the supported PIDs until they can figure out how to make it work properly.
Again, this is just my suspicion until HP Tuners finally tells us what happened to the PID (as it used to be supported).
For all the people that can see PIDs.
What ECM operating system do you have?
Out of all the 2003-2005 trucks I have tuned can scan all the PIDs.
Mine that doesn't log correctly is 05073548AK
2003 Cummins SRW LWB QC 4x4 NV5600 305/555
Looks like the OS is not patched on my ECM file for extended data stream.
http://www.hptuners.com/forum/showth...er-Information
2003 Cummins SRW LWB QC 4x4 NV5600 305/555