I asked about that a while ago, sounds like a total revamp is in the works.
I asked about that a while ago, sounds like a total revamp is in the works.
Ported TVS1900 OD cogs 10.5psi | ID850 | Vaporworx CTS-V 1:1 | COMP 219/233 .606"/.605" 113+1 | Ported TB | Pacesetter 1 3/4 LT | Solo Mach X3
When saving a layout it seems to save Charts, Graphs, and Gauges in that file, but Channels and Math Parameters have to be saved separately. Is there a way to save everything in one file, to make sharing between computers, and people easier?
Ported TVS1900 OD cogs 10.5psi | ID850 | Vaporworx CTS-V 1:1 | COMP 219/233 .606"/.605" 113+1 | Ported TB | Pacesetter 1 3/4 LT | Solo Mach X3
No
Saving Channels saves what you're logging, Saving Layouts saves everything else (except math parameters)
I do wish there was a way to at least "save all" on math parameters, but there isn't right now
i just tried to install the newest vcm 3.0 and it wont let me install it Screenshot (52).png
Try re-downloading it - maybe you got a bad download or something...
What does filter do in the chart and gauge setup? I can't find anything that mentions it.
Ported TVS1900 OD cogs 10.5psi | ID850 | Vaporworx CTS-V 1:1 | COMP 219/233 .606"/.605" 113+1 | Ported TB | Pacesetter 1 3/4 LT | Solo Mach X3
Filter averages the reading over however ms you put in there. It's useful for smoothing out jumpy inputs, external inputs in particular since they are recorded at such high rates now.
There are some changes coming that will smooth external inputs out a bit without having to use filter
Filter only works during live logging, so messing with it on old logs won't really do anything
Great, thanks.
Ported TVS1900 OD cogs 10.5psi | ID850 | Vaporworx CTS-V 1:1 | COMP 219/233 .606"/.605" 113+1 | Ported TB | Pacesetter 1 3/4 LT | Solo Mach X3
Still seeing "blue screen" crashes Running W7 Machine, anytime the Scanner is left open (Not scanning) and it goes into or put into sleep mod It blue screen crashes.
If memory server me the error message for the crash dump is "PRN_LIST_CORRUPT".
updated to last nights build and still the same.....
On mine if the laptop goes to sleep with Scanner open, next time I open it back up and start scanning the "Chart vs. time" view stays blank. Closing/reopening it fixes it
2013 Dodge Charger R/T Plus, Stock 5.7L, Edelbrock E-Force Stage 1, 3.25" Pulley, 450-HP 459-TQ.
Corsa Sport CatBack, 3.06:1 Wavetrac, Dual Fans, 1-7/16 Radiator, Mopar Oil Cooler
2005 Radix'd Silverado L33 5.3 ECSB Z71 @ 387-HP 395-TQ
The generic sensor for averages STFT does not work correctly, I had to create my own math parameter to average bank 1 and 2.
Ported TVS1900 OD cogs 10.5psi | ID850 | Vaporworx CTS-V 1:1 | COMP 219/233 .606"/.605" 113+1 | Ported TB | Pacesetter 1 3/4 LT | Solo Mach X3
Post your log and layout that isn't working (using the generic sensor for fuel trim averages)
We got this guy Not Sure, ...
Nevermind, I had units set to number rather than percent. Lots of new features that are throwing me off base.
Ported TVS1900 OD cogs 10.5psi | ID850 | Vaporworx CTS-V 1:1 | COMP 219/233 .606"/.605" 113+1 | Ported TB | Pacesetter 1 3/4 LT | Solo Mach X3
Keith, do you have an ETA for a scanner version that includes the DoD status bits?
In Scanner 3.0.57
If I click in the Channels window then click inside of a Chart, scrolling up and down with the mouse center button still controls (scrolls up and down) the channel window and does not zoom in and out on the chart like it should. If I click on the "chart vs. time" tab up at the top, then scrolling with the mouse will zoom in and out
Not sure if this is just my computer or a small bug?
Post a log and tune if you want help
VCM Suite V3+ GETTING STARTED THREADS / HOW TO's
Tuner by night
CPX Tuning
2005 Corvette, M6
ECS 1500 Supercharger
AlkyControl Meth, Monster LT1-S Twin, NT05R's
ID1000's, 220/240, .598/.598, 118 from Cam Motion
2007 Escalade, A6
Stock