Results 1 to 3 of 3

Thread: DOD and VVT delete DTC Codes

  1. #1

    DOD and VVT delete DTC Codes

    I wanted to know what DTC codes need to be adjusted when deleting DOD and VVT?
    I know about disabling the master switches for DOD and Variable camshaft, but I wanted to know what DTC's needed to be set to no error reported?
    Is there a sticky or link anywhere?
    I searched but only found bits and pieces of info here and there.
    Thank you in advance.

  2. #2
    Senior Tuner
    Join Date
    Jun 2004
    Location
    405
    Posts
    2,288
    It's not that hard to figure out if you just go down the list and look at the descriptions.

  3. #3
    Senior Tuner DSteck's Avatar
    Join Date
    Mar 2008
    Location
    St. Louis, MO
    Posts
    4,856
    Quote Originally Posted by 2xLS1 View Post
    It's not that hard to figure out if you just go down the list and look at the descriptions.
    Pretty much.

    The codes for the cam actuator will be towards the top of the list. The codes for the DoD solenoids will be towards the end.

    DSX Tuning - Authorized HP Tuners Dealer
    http://www.dsxtuning.com
    http://www.facebook.com/dsx.tuning
    Just say no to bull s***.
    IF YOU WANT HELP, POST A FILE!