I'm having a hard time getting realistic offset data for this injector. This is for a 4V 4cyl but you V8 guys probably have a lot more experience using Dsteck's ford to GM conversion sheet in Excel. Here are the injectors.
http://www.boschdealer.com/product/5...or-0280158279/
This is the offset data for MAP and IGN voltage I am getting using Dsteck's conversion chart. It seems really off to me in the higher ranges. Am I really off base here?
2008 Pontiac G5 2.2L (main oil seal became a crunchy Autumn leaf, RIP)
2016 Fiesta 1.0L Ecoboost - Project "not-so-detestable"
Bump for the hell of it. mainly want to know if these offsets seem normal.
2008 Pontiac G5 2.2L (main oil seal became a crunchy Autumn leaf, RIP)
2016 Fiesta 1.0L Ecoboost - Project "not-so-detestable"
They dont. And if you refer to dstek's comments about his spreadsheet used for creating that data, he says it will falsely curl up at the ends like that. You need to manually flatten that out.
Awesome. That's what I needed to know! I got the spreadsheet from another member but I'll look for the thread it was originally in.
2008 Pontiac G5 2.2L (main oil seal became a crunchy Autumn leaf, RIP)
2016 Fiesta 1.0L Ecoboost - Project "not-so-detestable"
I cant find info on bosch 0280158821 (2200cc) where would I find them please???
how would one "flatten" this out, im in the same boat right now, and i cannot get my truck to run barely at all and i believe this is the main problem, thanks in advance!
Reply With Quote