Hey, I just converted my LNF to blow thru MAF. The MAF is now located on the outlet of the intercooler before throttle body, after boost pressure sensor. I am in the process of tuning the car now and right after doing the relocation. I am getting a P0101 code and cuts boost to like 2 or 3 psi. It was boosting fine in Speed Density, while I was waiting to get my setup for the blow thru MAF. And if I unplug the MAF like it is now. It will boost but as soon as I plug it back in, throws the code and only boost like 3 psi. Any advice or help would be greatly appreciated. I am really ready to get it going 100%.
Thank you