Hello-
Looking for start up Tune help. I attached my tune file and a start up log- not much to see but maybe somebody can help. Truck will crank and somewhat sputter almost run for 1-3 seconds then die off. Almost like a VATS issue- current tune VATS is set to serial- if I set VATS to none- NOTHING HAPPENS WHILE CRANKING- doesnt even act like it wants to fire. VATS set on serial it will at least run/sputter for the 1-2 seconds as seen in log.
2000 Chevy Truck LSA Blower installed,1000CC/95 lb Fuel Connection injectors, LS3 Card style MAF but I am using ZL1 IAT Sensor in blower lid for IAT,
ZL1 3 BAR MAP SENSOR, P59 GEN3 ECU W/ DBC
I am hoping to run E85 at some point but right now Truck has 91 octane in it.
ALSO I LIVE IN DENVER,CO area (around 5,000 ft elevation)
I also added fuel injector data if it helps
LOG.4.1.23STARTATT.hpl
2000 Chevy Truck - LSA - 1000cc_IAT_ECT0_MAF_MAP-KPA.FLOW.hpt