bump.....still would like an answer....
bump.....still would like an answer....
Our current supported vehicles list can be found here http://www.hptuners.com/products/vcmsuite_vehicles.php
If its on that list its supported.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Alright so it says i'm supported, but when I was trying to get tuned saturday there was an error with the licensing
Hey Bill! Didn't know if Chris had tried his "work around" method on these bosch ecms...
http://www.hptuners.com/forum/showpo...28&postcount=2
if so, I have my scanner and can hook up to my G8 to see if Chris' method works. Let me know.
Andrew
2006 Duramax ECSB - Banks Monster Dual Exhaust, Tie Rod Sleeves, Kennedy Twin Deluxe Lift Pumps, Edge Insight CTS with Pryo, EGR Blocker Plate, PVC Reroute, Suncoast Stage 5 trans with 1056 triple disk converter, Cognito Steering Braces, PPE Race Valve, LML driver side exhaust manifold, AFE Boost Tube, Stock Drop-in BatMoWheel, ProFab Performance 3" Downpipe, Other mods along the way, TUNED by ME... Way too much fun
Let me know when you need a test mule! Always have my scanner with me
Andrew
2006 Duramax ECSB - Banks Monster Dual Exhaust, Tie Rod Sleeves, Kennedy Twin Deluxe Lift Pumps, Edge Insight CTS with Pryo, EGR Blocker Plate, PVC Reroute, Suncoast Stage 5 trans with 1056 triple disk converter, Cognito Steering Braces, PPE Race Valve, LML driver side exhaust manifold, AFE Boost Tube, Stock Drop-in BatMoWheel, ProFab Performance 3" Downpipe, Other mods along the way, TUNED by ME... Way too much fun
Gosh...Everywhere you look there's always someone somewhere looking for bosch ecm support from you guys, camaro been out since 09 and you guys still dont have a tune? How are trifecta and hypertech get to have tune service available before you guys? If i have to pay 600 for trifecta than i would rather get the vcm suite from you guys. Please add me to the list of peoples waiting
The difference between building a hardware and software package for the avg joe to tune his car and a large company like hypertech building a flash device to change a handful of tables and call it a "custom tune" is like night and day. Also reading the bosch pcm's is alot different then the ac delco pcm's we are more accustomed to. Not to mention even if we add read support for one of these operating systems that in no way means the others will be supported as these 3.6's use at least 2 different pcm's each with its own separate service number, its a very complex system to say the least with alot of dead ends.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"