HP Tuners - Can you do this!!

[IDRIVEAG8GT]

ok i added this to VCM Controls, General in the scanner. "Throttle Cleaned Reset".

2.23.509 or later

Chris...

Freaking awesome update Chris! Only problem is my cold starts went to shit.

[carlrx7]

ok i added this to VCM Controls, General in the scanner. "Throttle Cleaned Reset".

2.23.509 or later

Chris...

Chris,

Nice work! Throttle clean, trans clean, fast learn. Any other special features/procedures available?

-Carl

[elzarra]

i just get to this thread because i had this problem today with a 08 truck, this is not the first time it happens to me, it hapened everytime i clean a trhottle body on GEN IV, and dealer allways fixed the problem, now i glad i can do it with hptuner and i can't wait to try it.

thanks chris!!!

[elzarra]

There is a procedure for this and Snap On has it available on their scanner to do it in about a minute. I had a 2009 1500 5.3L that I cleaned a throttle body on and it idle fine right after backed it out of the shop fine. Road tested and pulled back into the lot put it in park and the idle was 2000 rpm didn't matter what I did with the pedal. Eventually it threw a code for idle speed to high. I grabbed the scanner and performed the idle air relearn and bingo problem solved. The pic is for a 2007 Vette. You could try leaving the battery disconnected overnight and see if it will clear what is learned.

i had been dealing with this problem about 3 years ago in my shop, since i did my very first trhottle service on a GEN IV and i allways had to take them to the dealer to do a idle relearn. i got the VERUS from Snap On bundle 9.2 and never had seen this idle relearn function on it. could you let me know where is it?

thanks in advance.

[flame]

On the Modis 11.2 under function tests -> module setup -> idle learn reset

[elzarra]

On the Modis 11.2 under function tests -> module setup -> idle learn reset

thanks flame, i guess a have to update to 11.4.

[04colyZQ8]

Were can I get this latest update?

[flame]

email support

[kingtuner]

HLOOO
PLEASE I NEED HELP FOR SIEERA OR SELVERADO 2500HD _3500HD 2012
I NEED SPEED CUT AND ADGUST TUNER
THE VCM HP TUNER NO READE FAIL THES TRUK
I NEED READE AM NO 23 TRUCK FOR THES PLEASE HELP
[email protected]

[04colyZQ8]

HLOOO
PLEASE I NEED HELP FOR SIEERA OR SELVERADO 2500HD _3500HD 2012
I NEED SPEED CUT AND ADGUST TUNER
THE VCM HP TUNER NO READE FAIL THES TRUK
I NEED READE AM NO 23 TRUCK FOR THES PLEASE HELP
[email protected]

This isn't the spot to post this! You may need a definition file created. You can email support, or post else were in the forum, like Gen IV engine, or Hp tuner general

[vette_c6]

HLOOO
PLEASE I NEED HELP FOR SIEERA OR SELVERADO 2500HD _3500HD 2012
I NEED SPEED CUT AND ADGUST TUNER
THE VCM HP TUNER NO READE FAIL THES TRUK
I NEED READE AM NO 23 TRUCK FOR THES PLEASE HELP
[email protected]

i couldnt understand u

email [email protected]
with ur hp number
they will send u a newer virsion

[Cheatin'Chad]

there is a learning function to correct the throttle as it becomes dirty. I will add the learning reset function to the scanner.

Very nice! Appreciate the customer support.

[BMBSALES]

I've tried this relearn on 07 escalade without any success...engine off, key on...
Am I missing something??

[Mep_q8]

I've tried this relearn on 07 escalade without any success...engine off, key on...
Am I missing something??

yeah first time i tried it on a 2008 HD it worked like a dream... then it just decided to stop working..

[DSteck]

Trying to do this on my 2006 TBSS (E40). It's greyed out with KOEO and KOER. Is there a special trick to this?

[c.u]

Trying to do this on my 2006 TBSS (E40). It's greyed out with KOEO and KOER. Is there a special trick to this?

No workey on the E40. It was set up for later ECM E38 and so on.

[04colyZQ8]

Getting P2176 with a E40 from a 06 Grand Prix, love to do a idle relearn. How can we get the learn function added for the E40? Please!

[mbray01]

you can try this works for me most of the time turn key on engine off, let stay on for about 3 minutes, then back off. then key on engine off again about three minutes, then back off, let key stay off about 3 minutes, then restart. usually works. But there has to be no codes. so you have to perform a code clear first. the three minutes allows internal pcm timers to time out, and allow itself to perform self checks, and ironically with gm idle is learned with engine off, not on.