I have a BBK throttle body with the top of the shaft removed for more flow , BBK cold air ,Ford racing shorty headers, steeda underdrive pulleys, offroad x pipe , flowmaster one chambers and I tried following the directions to get the charge motion control plates deleted but had a bad experience I need help before I have to take the car to a shop. Come to find out when you take those throttle bodies apart they are very sensitive to how the get put back together or they through codes like " stuck open or stuck closed or force shut down" so I got the car to run continuously now but it idles high 1000 when you come to a stop it idles 1500 for a min, when you go into second it attempts to take off for a sec, the throttle hangs way to long and between shifts it revs higher like your foots still on the pedal , and also when you delete those plates do you want to leave the sensor connected or remove it to I left mine plugged up