This is only the second time that we've taken (my wife) Natasha's '02 B4C to the track in the 4 years we've had it. The first time out - stock - it ran 13.2@105mph on a peg-leg diff out of a V6 car holding 3.08 gears. Since then it has only had cat deletes added, some mild suspension work, 4.10s w/a posi and tuned by me on crappy 91 octane. All the other drivetrain running gear is stock including the torque converter.
Yesterday it went 12.64 @ 111mph on a 1.9 60' on street tires using a completely stock LS1 long block - less the mods below. The car is a "point and shoot" daily driver - Natasha jumped in it and ran 12.8 @ 110+mph with little trouble.
Also, I should point out we were running around newer 5.0s and a supercharged (6.1) SRT8 Challenger which were using drag radials - all day long. With a converter, sticky tires and a higher rev limit this car might be that bit quicker... but, that would undermine the daily driver practicality of the car.
Mods:
150K+ mile LS1+German Castrol
A4+Amsoil Dex 6
SLP Lid w/K&N
Free Mods
Fernco
P&P TB
5:1 MAF Screen
TR55s
HPT Pro (Duh!)
Cat deletes
Cutout on stock exhaust
Boxed LCAs+UMI LCA Relocation Brackets
Energy Suspension & 1LE Bushings
Edelbrock Adj PHB
Y2K Wagon Wheels w/Sumitomo HTR Z II Tires
SS Hood
Auburn Posi & GM 4.10s
The run:
http://www.youtube.com/watch?v=z7mlArSR0rQ
Attached are the files used for/logged from the run for reference. It should be noted that the WB gauge vs. IO reading have about a .2-.3 discrepancy between them as I don't have the offsets for the MTX-L perfected yet.