Hi I am new to the tuning word can someone help me out and check out this tune?
file uploaded..
Hi I am new to the tuning word can someone help me out and check out this tune?
file uploaded..
Last edited by 22eco; 12-01-2009 at 08:47 AM. Reason: Cant upload a file
2002 Pontaic Sunfire 4 Door 2.2 Ecotec
15.9best 1/4 @ 87mph (I/H/E)
2005 Silverado 2500HD 2WD LLY, Amsoil in the motor, 4" MBRP DP back, 4-6" tip, EGR Blocker plate, small HP Tune, boost and pyro gauge. PPE shim kit.
14.8 best 1/4 @ 91 MPH
@ aprox 68*
45 looky loo's but not a post one...
I cant belive there is no diesel people here..
2002 Pontaic Sunfire 4 Door 2.2 Ecotec
15.9
2005 Silverado 2500HD 2WD LLY, Amsoil in the motor, 4" MBRP DP back, 4-6" tip, EGR Blocker plate, small HP Tune, boost and pyro gauge. PPE shim kit.
14.8 best 1/4 @ 91 MPH
@ aprox 68*
Im not sure what your after exactly, and I am no guru but here is something I have been playing with for the same year of truck. It provides a good increase in power, economy, and is fun to drive. Both the DIC and hand calculation come out at a 5 mph increase. The transmission shifts more like a gasoline powered vehicle, but is a little quircky after reflash. The TCM must learn a few perameters and then it smartens up very quickly. Drive the vehicle nicely until you notice shift improvement. I have not dynoed this tune or had a pyrometer on it yet. USE AT OWN RISK, this is far as I was willing to go with stock transmission(and possibly to far?) but so far so good.
Last edited by mecanicman; 01-29-2010 at 05:41 PM.
I just want some one to look at my tune... I dont really know if its safe for my stock trans... I dont have my pyro is not hooked up yet I will have it hooked up next week so i might try to run your tune then.. thank you for responding...
2002 Pontaic Sunfire 4 Door 2.2 Ecotec
15.9
2005 Silverado 2500HD 2WD LLY, Amsoil in the motor, 4" MBRP DP back, 4-6" tip, EGR Blocker plate, small HP Tune, boost and pyro gauge. PPE shim kit.
14.8 best 1/4 @ 91 MPH
@ aprox 68*
I looked over your tune, again not a guru, but I think it is safe. You will find the one I uploaded to be bigger. Based on what I have read, a pyro should be used on both tunes if you intend to pull anything. I intend to put a pyro on mine soon, but I have a bigger tune in an LBZ and have not come close to the 1350 F limit with it. My transmission mods may be more then should be done stock for pulling, but it drives so much nicer.
Well I dont pull anything... I just bought a diesel because I am a stubborn SOB and I wanted one...
do you know how to reset the trans adapt?
2002 Pontaic Sunfire 4 Door 2.2 Ecotec
15.9
2005 Silverado 2500HD 2WD LLY, Amsoil in the motor, 4" MBRP DP back, 4-6" tip, EGR Blocker plate, small HP Tune, boost and pyro gauge. PPE shim kit.
14.8 best 1/4 @ 91 MPH
@ aprox 68*
Use VCM editor, vcm controls, trans, trans adapt reset. It also is reset every time you flash the TCM.
first the tune is safe for your stock trans. second i think the tune could be smoothed a little. what other modifications do you have done to the truck
All thats done to my truck is whats in my sig... and thank you for your input
2002 Pontaic Sunfire 4 Door 2.2 Ecotec
15.9
2005 Silverado 2500HD 2WD LLY, Amsoil in the motor, 4" MBRP DP back, 4-6" tip, EGR Blocker plate, small HP Tune, boost and pyro gauge. PPE shim kit.
14.8 best 1/4 @ 91 MPH
@ aprox 68*
mecanicman
I get the following when I try to open your tune:
"Unable to open file. Index was out of bounds of the array."
Any ideas?
Last edited by Red Heeler; 01-09-2010 at 05:59 PM.
I am using a newer version of hpt then you, contact support and ask for a copy of latest beta. Once its installed you will be able to open the file. Have access to some dyno time again, so I will be working on improving this tune next weekend and see if my new histos work correctly.
Last edited by mecanicman; 01-09-2010 at 10:37 PM.
any luck with that tune man... I can open it up eather...
2002 Pontaic Sunfire 4 Door 2.2 Ecotec
15.9
2005 Silverado 2500HD 2WD LLY, Amsoil in the motor, 4" MBRP DP back, 4-6" tip, EGR Blocker plate, small HP Tune, boost and pyro gauge. PPE shim kit.
14.8 best 1/4 @ 91 MPH
@ aprox 68*
Did not get the dyno time I had hoped, spent to long on something else. I will upload the tune again here, but as i said, you have to have a recent beta to open it.
I can't open the file either. I have the most recent updated file version 2.22.3152.18236.
Are you using some other beta file?
Roy
2007 GMC 3500HD, Sinlge Rear, ECLB, LBZ, Allison, 4x4
- PCV reroute, EGR blocked, 4" turbo back dual out exhaust, pyro and boost gauges, led upgraded cluster and steering wheel controls
2005 Chev 2500HD CCSB, Duramax, Allison, 4x4,
- LBZ mouthpiece, PCV reroute, EGR blocked, pyro and boost gauges
Yes...he is using a beta file.
Reply With Quote