Results 1 to 3 of 3

Thread: 2010 Camaro Tune Question

  1. #1

    2010 Camaro Tune Question

    Got a 2010 SS here that we just did a cam swap on! Cam is a .226/.238 .605/.615 113LSA. Did the tune and the car sounds great and runs seems to run pretty good! Gt a 12.9 WOT AFR and a 14-15 AFR at daily driving! It idles a little rich about 12-12.5 which I cant seem to fix! Thing is when he races the guys he raced before he loses by more then he did before the cam! Car seems to have slowed down but there are no hardware problems! He is shifting at 7100 and still seems to be slower! Havent dynoed the car yet but it should put down about 500-525 to the tires! Any suggestions on the tune that anyone would do different?
    An help would be appreciated?
    Thanks,
    Jake
    Last edited by hantzum; 06-13-2011 at 09:21 PM.
    Hantz Racing, Jake Hantz Odessa, TX
    98 Camaro SS 408 LS1
    60 ft. - 1.10, 1/8 mile - 5.89, MPH - 136.22, 1/4 mile 9.012, MPH - 155.66

  2. #2
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    3,378
    Wrong Forum, good luck though.

    Email Tunes, [email protected]
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  3. #3
    Advanced Tuner
    Join Date
    Dec 2006
    Location
    Rockwall, Tx
    Posts
    247
    With stock heads a cam that size will only dyno 470-480 rwhp on a typical dyno.