Im getting front wheel speed sensor errors on this vehicle for some reason.
when I drive it with a scanner that will monitor all 4 wheel speed sensors, they all show the same speeds and don't ever seem to drop out.
but I am getting codes:
[PCM] P0101 - Mass Air Flow (MAF) Sensor Performance (Old) (History) (Immature)
[PCM] P0300 - Engine Misfire Detected (Old) (Immature)
[Brake] C1221 - LF Wheel Speed Sensor Input Signal is 0 (History)
[Brake] C1222 - RF Wheel Speed Sensor Input Signal is 0 (History)
[Brake] C1248 - EBCM Turned the Red Brake Warning Indicator On (History)
[Brake] C1278 - TCS Temporarily Inhibited By PCM (History)
[Brake] C1293 - Code C1291 Set in Previous Ignition Cycle (History)
[Restraints] U1096 - Loss of Communications with IPC (History) (Immature)
[Restraints] U1000 - Class 2 Communication Malfunction (History) (Immature)
[Restraints] U1016 - Loss of Class 2 Communication with VCM (History) (Immature)
[HVAC] B0363 - (History) (Immature)
[HVAC] B0441 - (History) (Current) (Immature)
[Convenience] B2282 - (History) (Immature)
[Convenience] B2284 - (History) (Immature)
[Convenience] B2286 - (History) (Immature)
[Convenience] U1016 - Loss of Class 2 Communication with VCM (History) (Immature)
[Convenience] U1096 - Loss of Communications with IPC (History) (Immature)
[Convenience] B2287 - (History) (Immature)
[Convenience] B2283 - (History) (Immature)
[Convenience] U1016 - Loss of Class 2 Communication with VCM (History) (Immature)
[Convenience] B2285 - (History) (Immature)
[Convenience] U1096 - Loss of Communications with IPC (History) (Immature)
[Convenience] U1096 - Loss of Communications with IPC (History) (Immature)
Any ideas on this?
thanks