If this is Todd please email me some more driving scans! I sent a scanner configuration on Jan 19th that'll give me more info. And yes there's a LOT missing on LLT 3.6s with the Bosch computers,...
Type: Posts; User: Overkill
If this is Todd please email me some more driving scans! I sent a scanner configuration on Jan 19th that'll give me more info. And yes there's a LOT missing on LLT 3.6s with the Bosch computers,...
Downloaded both the tune files, neither are Overkill tunes. Send me an email [email protected] if you want, let me know who the original owner was, I can check if he was a customer. Maybe the...
Sorry to hear about your experience with the supercharger tuning, definitely not right. I'm Will at Overkill that does Vortech kits for Camaros and Cadillacs. Do you have an email address we can chat...
Does anyone currently have MPVI2s in stock for purchase?
Interested in this too
Correct, I haven't tried to user define the formula because I don't know what to input, but I've tried the preselectable LC-2 and others but still have this issue. I assume its a wiring issue but I...
I've searched for an hour and a half before posting so please no lectures!
Can't get my LC-2 to read properly on scanner when connecting to pro.
In scanner, in channel window, I've right...
Hey guys. Anyone been able to add the flex fuel sensor to an e37 computer like the 07-13 4.3 v6? No vehicles have a sensor and the e37 from factory
Hey guys
Looking to retrofit the IAT2/MAP sensor combo from an 05-07 LSJ into another project. I've downloaded several LSJ tunes from the repository but don't see the IAT resistance vs temperature...
All rpm limits (aside from park/neutral) on the engine side are set to 6900-7200 depending on what the item is. Don't have a read of the engine side, tuning that in Diablosport still
Trying to get it confirmed by logging current gear and shaft rpm on the scanner but I believe it's getting its commanded shift and the trans isn't completing it. It's entirely possible the trans is...
WS6HUMMER, when you say bumping up the line pressure using ramp torque rate, you were increasing or decreasing the numbers?
Been tuning a supercharged Charger 3.6 V6, 5-speed auto. We're doing very well on the engine tune, and have fixed some driveability issues with his 3.91 gears and FTI 3500 converter installation by...
Wow, that was unexpected, great job guys
2011+ Pentastars, 2015+ 5.7/6.4 Hemi, 2.4 Tigersharks
Anyone point me in the direction of a company that creates or would create an offboard programming harness for Dodge vehicles?
All my contacts are GM guys and the answer was no lol
No I don't know which pin to connect the sensor to on the E40 or if its even possible, supposedly it is.
There's also no switch to change from virtual to actual sensor on the E40 coding.
I've...
Bump, can anyone help me with what's required to install the sensor on my 06 Trailblazer SS with the E40 computer?
Hey guys, I see the E40 computers have Flex Fuel settings, and on the LS4s it's enabled. From reading, I understand that this is the "virtual" sensor or the guessing game style.
My question is...
Has anyone had issues with the fuel pressure not maintaining itself at WOT on a Cruze?
I'm currently at 17-18psi at sea level and at initial WOT the fuel pressure on the scanner reads 57.x-58 as...
If you're running around 11.0 AFR then you're on the money as far as I'm concerned.
I've tuned close to 100 now. Attached is a stock file to poke around in.
Try new plugs and wires.
But also, I've tuned the E-Force Camaro kit, replace that intake box with something else, it'll be too restrictive, you'll see the MAF frequency fluctuate and have...
Hey guys, anyone else do offboard programming?
Having a new issue with GM Service Programming System on E37 computers. When I enter a VIN and go to program, it brings up "M6413: Off-board...
This has worked for me as well, the other issue I'm having though is you can't take a 10-11 ECM from an Acadia for example and flash it with a Camaro VIN. It asks for a PIN code and even if I guess,...