what about now?
Type: Posts; User: jaykebab
what about now?
why does my beta download just keep dissapearing from my profile every 6 months or so? does this happen to anyone else?
cheers, its defiantly not the best way to do it, the reason i am trying to though is because its an engine transplant into a winch challenge comp truck which will be submerged in water a fair bit. i...
I am not worried about that, i would plan on using a static iac and controlling idle via timing
Has anyone ever tried this? or even heard of someone trying?
hey guys, im wanting to run a cable TB on a L98 running and e38 ecu, I am aware that the e38 can not operate an IAC, I am not worried about that, however I notice the e38 want 2 throttle position...
hey guys, im wanting to run a cable TB on a L98 running and e38 ecu, I am aware that the e38 can not operate an IAC, I am not worried about that, however I notice the e38 want 2 throttle position...
http://www.hptuners.com/forum/showthread.php?50641-GMPP-E67-Controller-P0507-Code-and-Speedo-Calibration-Issue-Fixed
Is this trav with the 4wd? with the e67 ecu? maybe it needs to be reflashed to a vehicle based config rather than generic gmpp standalone
could someone please email me the latest beta as i need it like right now..... [email protected]
ive emailed support but im in australia and by the time they get my email it'll be too late...
Cheers Bill!,
where abouts do i find the download link for the beta's?
or do i need to do a request and get it emailed?
Cheers
Cheers ranger! I had no idea that's what the 2 bar did... Why would people want to use it the generic way when you could just use the 2 bar?
I actually can't find anything that actually explains...
i have done a bit of reading and it seems like a total pain in the arse to tune.
How do you go about doing your timing if you cant adjust it on the fly?
it would be awesome if someone created a...
Hey guys ,
I'm just after some straight answers as I'm a bit confused,
Can you tune an e38 ecu live on the dyno?
What does the 1 bar enhancement get you?
can the e38 be reflashed with a...
coolant temp is fine?
any idea's why this would happen?
working on an ls3 today and looking in hpt with the vehicle stationary the speedo is stuck at 255k's?
Any ideas why?
got a 3 bar map sensor?
sorry if that doesnt make a lot of sense, i cant find any how to's on dyno'ing in real time with hpt RTT
Hey guys,
About to have my first try at RTT on the dyno,
in the past i have not used the enhanced OS and used the LO table only
after upgrading to enhanced OS i have copied my LO table to...
ls1 5.7 litre
set stoich to 15.5 afr and adjust o2 switch points to match using wideband , will this work?
obviously upping the timing to suit
im running maffless so i thought if i did this...
hey guys, i tuned the ve on my ls1 using my innovate mtx-L wideband, all good whilst in open loop, when i put it back into closed loop all the fuel trims went negative from around -10 > -20 and my...
Anyone?
Can anyone point me in the right direction? Or to any 3.6 alloyTec guides for tuning?
has anyone else had this issue?
there are 6 different o2 pids to log
wb1 which always reads 0
wb2 which always reads 0
2 that just say 5mv all the time
2 that say 0mv all the time
and...
been doing a bit of reading, it appears that the allotec 3600's use wideband oxygen sensors, is this correct? if so are they accurate enough to tune from? or should i remove one and put my lc-1 in...
can i just force 14.7 afr in the afr control section in hpt scanner, log the wideband and use that as a tuning reference? just that way you wouldnt have to worry about turning pe and cruise lean off,...