downloaded the vehicle on 2 different (MPVI2 & new MPVI3) when it completes all pages are just blank. Takes 10 minutes to download and says completed. Could this vehicle have a previous tune that can...
Type: Posts; User: staytuned
downloaded the vehicle on 2 different (MPVI2 & new MPVI3) when it completes all pages are just blank. Takes 10 minutes to download and says completed. Could this vehicle have a previous tune that can...
Can you tell which interface last tuned a vehicle ?
How are they able to sell delete tunes for an HPT device ? Something the rest don't know ? A secret back door ?
Anyone have issue with not reading due to this ?
If reading for the first time and says internet does that mean it is a virtual read or is it reading the actual file ?
Will read ok, will initialize and erase and that is where it stops and says failed. Leaving the door open, radio off and no help. Any ideas ? Thanks !
In need of a stock 6.4 for a 2008 with auto. Any help ?
My beta version does not have any adaptive or general under shift properties, Am I missing something. loaded different tunes from 03 to 08
Thanks, Jeff
I either need a tune where someone who knows what they are doing with a 6.7 Ford F550SD or can sell user defined tables. PM me.
Wondering if anybody can point me in the right direction to help solve an off idle hesitation stumble only when cold. If you hit it to pull into traffic it stumbles so bad it won't move, so you...
Me too. I found it in the first thread for tuning 7.3's HPT posted it. link: https://forum.hptuners.com/showthread.php?75236-HP-Tuners-Now-Offering-99-03-Ford-7-3L-Powerstroke-Support
the repository sample is from the first thread for tuning 7.3's the other is from customers 1999 7.3 Dually
I used the tune on the forum here to check against mine but not sure if it's stock. Having very early TCC shift points and firm shifts due to TCC staying on at low speed. Trans line pressure is up...
Just wondering why advance cam timing at upper end and not at the lower rpm range. I thought advancing it in the lower rpm range and retarding as it comes up and fully retarded by 5k would give the...
This worked for me ! unchecked high speed
Never heard of a P060. I tune GM diesels in EFI Live. Some of the knowledge carries over but descriptions are different, the scan tool is not as good so maybe that's a p0606 or p0603 ?
Try a different lap top if when you go to help section and click (about) it will say no update found if it is connecting to the site. If it shows an error means it is not connecting. Could not figure...
Tried a stock tune ? that will eliminate 1 possibility.
Yes, and EFI live does not need unlock either.
Can't raise apply pressure but you can decrease desired slip and increase the apply rate.So it will feel better. You may also want to turn off TCC in 1st thru 8th gear. What I can't get to go away is...
for timing maps you can take the best looking high elevation map and install it in all the low elevations, smooth it out and make them all the same. You can cut back egr 50% to save a bit of fuel and...
No it does not read the ECM at all. Opened a sup ticket and they stated disconnect battery and try again. Did that same thing. SCT can write it and unmarry it. But HPT reads nothing
for ECM. Only...
Vehicle was previously tuned with SCT. They instructed me how to un marry and check that it is not married. HPT will read the FICM and Trans but not the ecm. Any Ideas ? Tried multiple times....
those flashpaq tunes have to be generated from your original read, with a different file extension than HPT. How did you tune a ford with EFI Live ?
Why not use the 2009 TEHCM in the 2007 Trans ?