im tuning with the long terms closed loop disabled. and im interpolating the new area but im not using the smooth feature. would the calculate coefficients negate my changes without smoothing first?...
Type: Posts; User: Scotimus09
im tuning with the long terms closed loop disabled. and im interpolating the new area but im not using the smooth feature. would the calculate coefficients negate my changes without smoothing first?...
i have a idle surge that has got me ready to quit. i have know idea whats causing it it will swing from 700 rpms to 1200 rpms in a big annoying loop until it warms up then it only seems to slightly...
went to the junk yard and got a new ecm did a write entire on the ecm and now its fixed
borrowed another ecm from a friend and fuel pump comes on no issue. looks like my ecm may be bad
i have put a meter on the output of pin 50 its only outputting around 2.5 volts, i have ohmed the wire in pin 50 from end to end and there was only 3 tenths of a ohm and the terminal tension is good....
i did a write entire
Been working on this for a little while and need a second pair of eyes look at it
the problem is the fuel pump will not trigger via ecm controls
Engine is a 6.0 ly6 with vvt delete (by way of...
idk if your still working on this or not but the tune you have loaded has all the shift speed tables maxed to 256 mph ? if thats the tune in it is not going to shift untill it sees 256 mph.
what os is it ?
start with a crank variation relearn
still locked
stlws6 anything ever happen with this what did you find ?