figured it out!!
Type: Posts; User: gearhead927
figured it out!!
I never could figure out how you did that, would you mind giving me a how to? Thanks
I have no idea how you did that but I thank you very much. Guess I have some research to do.
I totally agree, they have great data I have purchased several times before. In this case though their website data is not scaled right to what is available in hptuners. I emailed them and they sent...
After taking a closer look at the injector data FIC sent me I think I found a problem, not sure its a big deal or would cause my issue but Ill be calling them monday to find out. I think all the...
I installed FIC 775cc injectors and entered the data they provided. Car starts and runs but the idle hangs if revved up sitting stationary and if you drive it the hang is worse. I tried changing idle...
I know it will start without a cam sensor but I am pretty certain no ignition or injector pulse without crank sensor working properly. I do not know what the pcm is reading for rpm though.
So I am thinking right though as far as changing the olfa table not affecting your tuned VE table etc?
Really just for when you start it and its in open loop for a minute or so. Having a richer mix for that period of time makes since to me. The factory has it set pig rich in the olfa for whatever...
Did you mess with the crank reluctor? is the crank sensor above the starter plugged in. I had a reluctor issue once and I know it wouldn't start but don't recall if injectors were firing or not. Just...
VATS issue will start and die if tripped. No fuel will do the same thing, make sure you have pressure.
Once you are done tuning VE and MAF with olfa table set 1.0. Does it matter if you change the olfa table from 1.0 to something else? Would retuning be required with the new olfa table settings or is...
In vcm scanner v3.4 where does it show total bytes being used?
I know absolutely nothing and am struggling tuning my own car but I noticed on your data log when the rpm are highest during the start B1 injectors are maxed out and B2 shows nothing. Maybe this is...
Yes I am.
I have a 98 ls1 computer and harness out of a camaro with a 6.0l engine m6. I have my AEM-4110 wideband working great logging through the egr. I am using the latest 3.xx hptuners. I made a new graph...