127429
I removed the dtc having to do with the MAF sensor and injectors... this didn't help at all... like I did nothing...
this is a 2007... everyone says it will drop cylinders as needed...
Type: Posts; User: Robertrw3
127429
I removed the dtc having to do with the MAF sensor and injectors... this didn't help at all... like I did nothing...
this is a 2007... everyone says it will drop cylinders as needed...
thing sat in a field for a couple years.... tons of misfires on 3, 4, 5 and 6 so I assumed it's wiring been chewed... cheaper to put a manifold and carb on then a new wiring harness.... it runs...
Does anyone have a build that I could borrow or does anyone have an idea of what needs to be dropped off the current build to get this thing to run correctly?
long story short.....2007 tahoe needed tranny, sat in field for amost a year, I bought it.
fixed tranny, checked dtc's complaining about misfire in 8...pretty much have that fixed and out of...
Not idle just to 3000
Rear o2's are connected but are just hanging in the air.no exhaust leaks
What one thing could I do, change to get idle?
here is I hope a good log file../
Again thank you for helping here.
Robert
yes I've used HP tuners for about 5 years.... VAT, Tranny changes, etc... all little minor stuff... this one is a little out of my hands. I've got it so it idles okay... It appears that the trims...
I have a 5.3 stock engine, in a 1978 truck. drive by cable, straight forward nothing swap. except when you try to go down the road. The 6.0 build runs the best but still no cigar, as you...
Please and thank you
this is true whether on the vehicle or my little portable station I made. When I make a VATS change I "Write Entire", I have been receiving a timeout, sometimes with a fail; or sometimes it says the...
Okay, I just am looking at this wrong. I am trying a different approach, which again isn't working.
Background: had a 2004 suburban 5.3, 4l60e seals were bad in it and the interior...
5FDP,
Thank you for that... am still learning... I was just about to ask.... about 6 months ago someone told me that if I couldn't find anything that was compatible that I could just copy the...
Did swap, last used this file on a Dually with a 4L80e now I has it in a suburban that has a 4L60e.
here is the break down of my build file.95646
and here is my build file95647
I've searched...
Well for anyone that is using a fuse panel from the engine compartment of a of an original Vortec 99 through whatever the power to the transmission is not or does not appear to be by a fuse what I...
Does anyone know which fuse in a1999 through 2002 Chevy 1500 standard fuse box supplies power to the transmission? I ask because when I check the port I'm not sure which one it is but it's the one...
Sorry this took so long, vacation, etc.91959
here is my build91960
OS: 937337
trans:16264187
tires: all 6 tires are LT235x85x16
rear end gear is a 4:10
I can say the last shift is done...
I did the wiring harness from scratch and am not certain if I'm getting into overdrive, I thought that having a file with shift points and speeds would give me a feel for if I was. I put 12 volts to...
Wondering if anyone has put together a file for a 4 L 80 e that does some impressive shift flows as far as shift points based on throttle position and so on and so forth I would be very interested in...
The thing is there's two videos that are on YouTube regarding a 4L60e to 4L80e one of them says that all you've got to do is take the brown wire out of the letter u and take the white wire out of the...
I did do a segment swap, but not 100% it took 90853
I have a 1997 K3500, was a diesel... bought it with no engine, tranny or transfer case, dropped a 5.3 with a 4l80e and a transfer case, manual one. using a 2000 ECM I think the wiring harness is...
When you download a file, and they say on the outside it's a 4L80e how do you know it really is?
I've looked for a site that has the GM calibration numbers with no luck... how can I tell that I've...
how do I copy just the injector data?