Thank you Steven for the clarification!
Type: Posts; User: Yagermeister
Thank you Steven for the clarification!
Steven I was under the impression that when Eric made the changes regarding how knock is interpreted in this post...
Is this new parameter only for Copperhead and up or is it also for the 2010 GT500 which received knock sensors as well? If the knock correction parameter is also for it is it simply reverse like the...
No definitely leave it digital and use MAF Airflow vs Period. Do it the same way though where you do an idle rev step and then adjust the period airflow by percentage off in the STFT.
There are a couple of ways to tune the MAF (STFT, LTFT, and STFT & LTFT). I just prefer to use only STFT on the GT500s since they have the built-in widebands. This way you don't have too much auto...
MRRPMBRP, I always make sure to disable LTFT while tuning the MAF. When finished then I re-enable LTFT. Also check for vacuum leaks after the MAF and exhaust leaks (prior to the O2 sensors). You may...
Mesho-27, if the MAF Type selected is Digital then only the MAF Airflow vs. Period table will be used. This is the default selection and should be used. The higher the period number then the closer...
Blue Bee can you post up the log and/or the tune file so we can see if maybe something was just overlooked?
Post up the log and I'll have a look for you
Great idea Bill! I would also note what stoich of fuel, what fuel pressure was used, and if it was a return style fuel system. Attached is a file for Injector Dynamics ID1300's using a stoich of 9.85...
MRRPMBRP, none of the licenses have been purchased for the VIN number of the vehicle in question. As Jn2 said above the VIN/Strategy combo needs to match for the car.
Here's what you licensed:...
Awesome work Eric!
Any progress on this request would be greatly appreciated! I like Dan Stewart's idea of being able to allow the user to map from the channel list. Out of the 23 channels logged on my 2010 GT500 with...
bump
PM sent small tuner
PM sent Dave!
Made the adjustments in the tune for the different gear ratios in 5th and 6th and still only have cruise control in 3, 4, and 5. Any other ideas would be greatly appreciated
Eric, thank you! I was unaware that the 2007 TR-6060 trans that I just replaced my 2010 TR-6060 with had different 5/6 gears. Thank you for the heads up! I'll make the changes in the tune now.
Is there anything in the tune that could possibly prohibit cruise control from working in 6th gear? It works flawlessly in all other gears at any speed but it doesn't work at all in 6th.
Under Engine > Airflow > IMRC there are a number of switches to enable/disable the IMRCs if they have been removed. We have made blockoffs to mechanically keep them open. What would be the proper...
PM sent!
What if you do not have THE stock file from the same vehicle and need to get a stock file from the repository due to the same issue as above? How do I license this other stock file that has a...
Does anyone have a list of the possible spark sources and where they look to for the 2010 and older GT500s?
I am seeing Cylinder Pressure Limit at WOT even though I have Borderline set to around...
A guide would be a great asset. Thanks in advance TunedbyNishan!!
I would message the OP, Jim Ferraro and he can get you more information.