I found my issue. I had to change my mad table Evan though I am operating in sd. Turned up my lower mad table which allowed me to bring my fuel down to 18 if I so wanted. I'm not sure what is safe...
Type: Posts; User: dylanplace
I found my issue. I had to change my mad table Evan though I am operating in sd. Turned up my lower mad table which allowed me to bring my fuel down to 18 if I so wanted. I'm not sure what is safe...
If I plug my narrowband sensors in it will make it idle around 14 to 15 in p/n or in gear. The downfall is it's keeps it around there all the time and causes a scary lean sputter when you let off and...
69067 this is a log of starting it. its good then drops off 69069
Fuel pressure is about 58psi at idle
It's just strange to me that you buy "high quality" injectors and the cheap dekas I had before worked better with way worse numbers
I am using your tune. Just trimming away at the ve to get more consistent at 14.7. I haven't checked my pressure since the beginning but I will check again in the morning. I have 80lb dekas in my...
thanks for all th help so far but no mattr what i do to my ve table in the idle range it makes no difference. its 10.6 or nothing. i rally think something else is causing the issue
68963
68964
68962
i tryed plugging my upsteam o2s in on th last one and it got alittle scary on the afr
I'll log it right now. Idk why it's like that. I just copy and pasted
The truck runs and drives awsome. Just rich idle. That data came directly from injectors dynamics for those injectors
After start enrichment and prime because I wouldn't start when I lowered the trans fuel. Tried the ve a lot. I must have messed something up in the beginning to can use this
68955 the tables i played with are in the title. got it to 12 in gear and about 11.6 in park
When I put those numbers in my afr commanded is 23 no matter what I do to fuel
I tried that and jacked the he'll out of the table by the end and it still will just fire and go all the way mean and shut off
.002 is to low to run so I cut back from the. 044 I had down to 32 and it's at an 11.3 now but if I cut anymore it won't start
I'll try that now. Thanks
68901
First off thanks to all the people who have helped me along the way to learn how to tune my truck in. But the issue I'm having now I have been fighting for a few days. Truck idles at 10.6 af on my...
hahahah thats what i have on my 2500 right now. cam was chewed 3 bad lifters
jeez. thanks for the help, the truck currently has the heads off of it because of 3 bad lifters causing valves to hang opened. have some 799 heads and a zr1 cam anyways. still sucks
ya im using 3.4. my last turbo truck i started with a nice base tune so i wasnt so fucked but im determined to learn. ive been having all kinds of issues with enrichment afterstart with a different...
ya i know my tune is pretty rough. im posting a new one of where im at with a better log. om not sure how to modify touque managment yet68739 68740. thank you guys for all the help so far
ya i have to change waste gate springs. i will take a better log. im trying to get my aem to read in my scanner at the moment
so trying to get my afr halfway right i noticed when i load the engine up in gear that my timing falls off and causes it to have no power at all6871968720
had a bad map sensor. fuel trim still -30