Search:

86967 Look at my 2-3 shift. Do you think the oncoming clutch is coming on to aggressively?

I have 9690 set to 7500 in all modes. The last log it was still hitting engine rpm limit but I do not have a log after changing the high pressure pump rpm limit. My friend who I am tuning for said it...

I will try that this afternoon.....thank you

I would be interested in comparing your tune or the base tune file.

2028=none
1165=disable
44550=disable
44456=disable
44554=disable

This should get you started..........

Restore table 40070 to stock?

What rpm does it shift at stock?

What limits is it hitting? Source?

This is not a file I would run around on. Multiple issue with it and downshifting is spastic. If you can compare with the EU tune and it fixes your issue let me know. I will send a good file to you.

Did support verify that is the limit? That was the first hurdle I had, 6500

I cant imagine..........Need all that rpm

I am having a hard time finding the limiter preventing shifting above 7400 rpm. Any ideas?

What are you logging that gives error for the injectors? STFT?

It is NA. I installed new plugs and brought the gap down to .040. Compression test, best was 190, worst was 180 but all others were somewhere between. Still makes good power, right at 500 at the...

I agree, very dirty signal. JLT cold air, filter on so it should keep the air straight.The cold air has been on for 2 years and I only started noticing this over the last 6 months or so. This is on...

78239 Another log from today. Time for the misfire starts at 7:31:28. I'm at a loss

78231 Attached is another log file. I started earlier, 1700 rpm or so and pulled to 3500-4000. Several pulls. Added a few channels.

That MAF signal looks dirty...........I've seen worse but still looks ugly

When it is reading 2.0 lambda it is in DFCO. You will notice i am transitioning into WOT and AFR comes around although it really is not stable. I have tried being on both sides of the STFT + and -....

It may be hardware which is where I am leaning but because it is in a very specific range it leads me to believe it is in the tune.......

I could really use some help. My car is missing badly from about 2000 rpm -2700 rpm with moderate to heavy load. Checkout attached log file. Best attempt was around 8:51:4778186

I think you made a great choice! Better power then a gt350 everywhere except after 7400 from the test I have seen. On top of the price is amazing.

I know why they are having issues with breaking,...

That makes sense about where I am at now. Do you know why it freaked out the first time I flashed with the modified factory tune. Sad thing is I tried restoring the factory back up and when it...

so I just loaded a program I did for another coyote and the car runs great. Made some changes to the file, went to flash and now it reads, "unlicensed vehicle" It will not even accept the factory...

I have a 2014 mustang I am trying to tune. Car came with an SCT programmer so I flashed it back to stock and then read the file with HP tuners. Edited the program and flashed the car. As soon as the...