Having a similar issue with mine also :(
Setup HP Tuners and LM Software wit the same readings for Voltage and mine never reads more than 10AFR on HP Tuners but reads 14+ on the gauge.
Quite...
Type: Posts; User: Phantom409
Having a similar issue with mine also :(
Setup HP Tuners and LM Software wit the same readings for Voltage and mine never reads more than 10AFR on HP Tuners but reads 14+ on the gauge.
Quite...
K, I figured why the car wants a MAF or why it thinks it does.
He did disable the MAF, it's set at 0hz but the SES light is still enabled.
Now he also has it set as no MIL light so here again I'm a...
I have had the car started and running a few times over the last year.
The oil has been changes 3 times now and the last time was Saturday and it was clean, no shavings.
I have driven the car maybe...
Ah, sorry about that.
Motor is a 408
10.8:1 Compression
Intake is a LS3 w/ 92mm TB
Injectors are SVO 42lb Green Tops 280 150 558 and are set at
51.1 51.5 51.8 52.1 52.4 52.70 53.0 53.3 53.6 ...
I'm very new to this and I'm not sure what I have going on here.
This is a data log I did 3-14-15
This was done just at idle with just 1 or 2 quick throttle blips.
My car feels like it has a miss...
Is that sheet for the 42's or do I need to edit that?
Then my next green horn question is how?
49.61048801 49.91967562 50.22695997 50.53237577 50.83595671 51.13773546 51.43774374 51.73601236 52.03257122 52.32744941 52.62067517 52.91227597 53.20227854 53.49070887 53.77759225 54.06295332 54.34681...
The car runs like crap, can't even drive it.
It don't make enough power IMO to flash the converter.
I would like to fix it but like you said......he has it so messed up I don't know where to start....
Changed file back to .70821 and a 5.7 V8
I can switch it back and post it up
I changed the engine type from 5.7 to 6.0 and the Cylinder Vol to the .8xxxx
The config file is idle only with some little revs.
The car will not start unless I prop open the TB blade with a screw driver till she warms up.
If I give it gas and let off right away she will...
Alright, thanks again
Thanks for the help :D
Could that effect the way the car runs?
Cylinder head CC is 69 if that is needed with a -6cc piston
New to this and I'm not sure if I found an issue with the half assed tune that was put in my car.
I down loaded a few tunes for 408's just to have a look and there Engine and Cylinder Vol. were way...
New to this and I would like to know this info too.
Swapped a 2005 6.0 w/ 411 PCM in my T/A
Just though I would say :hi:
New to tuning :worship: but not cars
I live in Michigan on the West side of the state and I'm a father of 2.
I have been doing cars since I was about 19 so 20 yrs now....