hey everyone. I have a customer that installed some long tubes headers and xpipe and is getting some afm codes. the customer also wants me to tune the exhaust valves to because its not loud enough...
Type: Posts; User: fbodyraing1
hey everyone. I have a customer that installed some long tubes headers and xpipe and is getting some afm codes. the customer also wants me to tune the exhaust valves to because its not loud enough...
I believe its code u1510 uncheck it and set to no error. i have done it with a few trucks now
have a 2019 gti. has a down pipe exhaust and intake and i keep getting code P003A (44) boost pressure control A learning limit exceeded. anyone ever dealt with this or know how i can fix it in the...
i believe those injectors are 42lb at 43psi. ls run at 58 psi so they would be more like or around 51lb/hr injectors at 58psi
118764
118764
its a stock wrx file
heres a stock one i have
hi I was wondering if anyone can help me or look a my trans tune and let me know what I'm doing wrong. I've tried everything now. its like the engine to fast for the computer or something.
going...
i loaded that tune i change the idle because it was at 750 and shaking pretty good. but it was a night and day difference in drive ability. i could drive with the windows down witch was nice lol and...
thanks scottt28 on the spread sheet i should be shooting for eoit at 440 ?
i have lg super pros long tubs full exhaust .there isnt any exhaust leaks and ill look for vacuum leaks
the injectors are stock this is the new idle with the changes ect all at 80 and pe at 35 at idle
im new at this lol. i had it professionally tune by a big shop and ive never been really impress with it. no i dont have a wb. sounds like i should just start over
i just put a fast intake on but haven't had it tune for that. 69455
ok made the changes iv got the ect at 80 right now could notices a big difference in drive ability smell dose seem less the flue trims are still 0.still have cam surge around 1400 to 1600 rpm the car...
it cycles when i give it gas then go back to .020 to .030 only at idle
ok i will give it a try. on my cam card it seas lobe lift is 364/364 if that means anything. i have to borrow hp tuners from a friend so ill report back when i try it.
i have a scanner and when the...
i haven t been able to find the .006 specs and my cam card in .50. is there a way to calculate it?
Hi i been reading a lot on eoit. I have an 07 z06 with tsp ls7r cam at idle it stinks so bad and i would like clean the smell up as best as i can. ive read that adjusting the boundary or the ect can...