?These guys? take ALOT of time to do these XDF?s.
For instance the L5P can take up to 40 hours to fully define for one OS.. so yeah $6-800 is fair..
Type: Posts; User: projectlnf
?These guys? take ALOT of time to do these XDF?s.
For instance the L5P can take up to 40 hours to fully define for one OS.. so yeah $6-800 is fair..
Vane position down at idle set it to 90% or more.
Try to blend the vane position from idle up and over if not the vane position with be erratic when you press the pedal down.
You want it to...
Ask your questions and we can help.
you ALWAYS tune first buddy.. but fun fact deleting emissions is illegal.... :secret:
Someone did it wrong!!! LOL
You have to hit the go advanced button I believe and then add attachments
You can post it here if you want. There isn?t anything special about it I just need to see the error.
Doesn?t mean it?s bad it might be tuned with efilive and lockedz
You?ll see the GM stuff has seed keys. They might have changed it to keep people out.
Efilive or HPtuners it doesn?t matter it?s a write only like stroked said.
If you want to pull a tune out you have to use Ktag and open the ecm up to solder on the board.
If you need help...
There is no ?logic? that does that.. there is something in the tune that isn?t right.
Literally 1000?s of trucks out there running perfect.
I can get you a factory tune that you can load
This is where user defined parameters will help IF the tables are there in your OS.
I have seen in the past ford and Chevy will add parameters to new OS?s and even take them away because they...
We would need to know your OS before anyone would help.
Post your file that you have and we can help further.
It might have to be done in binary? HPtuners might not have the table defined.
BUT. Hard cuts normally cut the fuel injector at the specified RPM and then there is a resume function.
The cut...
That?s a super vague question man. Not being an asshole but there are ALOT of tables. It would be a book if someone wrote out what every table means/does.
In vcm editor there is a description if...
Asking for a friend? That?s just as good as ?offeoad only? lol
What I have seen is the LML XDF?s are spotty. It?s best to start with a Binary file from efilive and get it converted to a HPtuners...
For everyone having issues.. i have seen multiple people NOT put the red and white wire in the correct location on the ECM fuse.. Or using the wrong fuse all together. 2017-19 are a different fuse...
Is that you EPA? its been a long time!!
Gotta post a file for us to see what your talking about
i have a few LB7 tunes you can PM me and i will give you my email so you can email me your stock file
145045
Right here is where the spoofing happens.
What i would do is get rid of the spoofing and tune your FICM. you can really open it up with FICM tuning.
For a basic FICM tune take the...
As slimmons said you?ll need a lot.
Some of us already have this stuff but just to make an XDF for an L5P your looking at $2000 if your stupid lucky..
The L5P A2L is super hard to come by.
Haven?t looked at the tune but judging by the log picture I bet it?s icp spoofedz
Which means it ?tricks? the ecm into thinking it?s less pressure but in reality it?s running a higher pressure. ...
For your turbo, you would adjust EBP low and high altitudes.
You can adjust fueling to get it to spool faster/slower depending on what you want.
For your digital dash, edge cts3 has done a...
What?s the strategy?