Much thanks for the reply. Not sure what that means but ill research that and try to figure what i need to change.
Type: Posts; User: Yurg
Much thanks for the reply. Not sure what that means but ill research that and try to figure what i need to change.
Any help or ideas where to look?
heres a cruising log with a 4th gear wot pull for a few seconds, its a little long but cant figure why it wont command wot lamda and the tune
Idle part throttle are pretty good now but the car wont go into wot tables. Still commands 1.0 lambda at wot. Any help appreciated
I copied the roush tables and was surprised it started and idled. This definitely needs adjustment but its driveable, has flat spots lean spots rich spots but it runs and the rest oc ghe controllers...
I got everything swapped both ways and used a f150 ecu and wrote the vert as built data with ids to it and all is good. now the problem is getting the stock whipple tune into the 14 coupe or just...
Looking for any info to get this running. Just did the swap and i obviously have a no start. Can jump starter and car runs but throttle is not happy. Also deleted hvac, airbags, electric rack, abs...
Building a factory stock car and just put a c4 in and obviously have a no start. Looking to see what needs to be done to my ecm to make it start and be happy.