Search:

Curious if the diagram you included is accurate with your later findings for the Camaro wiring. I bought this module from Dave and I'm going to install it on a 2012 ZL1 Camaro

Great info thanks. I have the NGK AFX and haven't had an issue like this before. I bought it new 2 years ago and maybe its time for a new sensor. I appreciate your input on this, but it looks like I...

My extreme cutoff is set to 6800 as well. Thanks for the heads up on the O2 settings, I will need to double check and see where I am. Thanks for taking the time to post!

I took the car out and scanned with your config file. I noticed 2 unsupported parameters and the gauge display isn't displaying correctly, but I went ahead and drove the car a bit anyway....

First of all, thank you for taking the time to respond, I really appreciate it.

I remember reading your write up a few weeks ago from work and tried your config file on my work laptop and...

I just added a kenne Bell BAP and larger lower pulley 9.55" up from 9.1" and I am noticing my O2 voltage bouncing around. The scan file I have attached has several 1st, 2nd, 3rd bursts. I am running...

Holy shit! Well good luck on that one. I suppose starting a thread a thread with "I have a 2013 Camaro ZL1 running a closed loop......" might be a little misleading. I remember seeing pictures of...

I noticed you have the Cylinder Vol. set at 0.87500

That makes sense, unfortunately I don't see LS4 3bar.

Question on ZL1 E67
Does it matter what table format I use in BlueCat to build my Virtual VE histogram for scanning, I used the LS1 3 Bar to start with. Thanks.

Nice tutorial Mowton, thanks!

Thanks for spotting that. I was adjusting the MAP enable but never hyst or delay so I'm not sure when I did that. I'll look through my History. I have so many saved files for this that it really is...

Thanks Ed

Took the car for a mild drive yesterday and accelerating from a turn at the light, the car stumbled and I just happened to be scanning. The scan file I included has the stumble around frame 32900 if...

Running Win 8.1 with VCM Suite 2.24.491 and I seem to be missing the ° symbol in the scanner, the place holder is a black diamond with a question mark. Hopefully I'm not missing something obvious.

BTR Stage 2 Camshaft, ID850's, NGK TR7ix Plugs, Ported Blower & Snout (102mm), NW102mm, Airaid CAI, LPE 2.55" upper Pulley 9.1 lower, Stainless Works 2" headers w/high flow CATS

I was looking at your 955 pulley header tune file and your table is the same as the stock table.

41993

Stock was this.

41990

I'm having difficulties sorting out my current ZL1 tune and I am not really sure where I am at. My question is this, every time I see this graph I can't help but think something isn't right....

Cool thx for the response. I might enable it and take a look anyway, I really want to continue to learn this.

I bought a copy a few weeks ago. I'm not much of a book critic so I won't get to opinionated. It's definitely a nice addition to my small collection of tuning books. It was easy to read, and most of...

Not to hijack this thread, but I too need to clarify what custom OS to select for my 2012 ZL1 17psi boost... is the E67 2.5 bar choice the right one?

If the custom OS overwhelms after the write entire, I assume you can revert back with a write entire of the previous calibration file?