Search:

Yes, M6 trans and using I believe stock parameters there. My wideband is reading correctly (so I believe) it does match up with what the Scanner is reading, I'm attempting to dial in my fueling to 13...

I'm making progress SD tuning this thing but I'm kind of stuck on this idle, when I get back to the driveway after logging LTFT's, it stumbles BAD and today it actually stalled. I'll attach a log...

yes OL, had STFT off dialing in the LTFT and my wideband in the Scanner wasn't recording any data, but was reading a lil lean at cruise 15's on my gauge. I'm probably going to run this SD. I'll post...

I'm getting the hang of tuning this thing, P59, 2005 CTS-V, LS2 SNS stage3 cam, .020 over bore flat top valve relieved pistons, H beam rods, 60# Deka injectors, sheet metal intake with a 90mm LS2...

Not trying to fail MAF for SD but I will change the MAF codes to 2 and I changed the displacement to 6.0L as far as the cylinder mass goes, I was looking at stock LS2 and they show Mass of 0.75000,...

I'll try this again and see if I can get someone to help on this

I've made some changes to my set up and I'm having a hard time getting this thing to fire up, P59 computer and I'm using a 3 Bar...

Hey all, new to Tuning (well I dabbled a few years ago and gave up) since then I've taken interest again. Anyhow some history on this subject. it's a 2005 CTS-V with a LS2...I replaced all bearings...

Hey all, I'm getting the hang of this but have been experiencing a problem viewing Data Logs, VCM Editor vs 3.4.48

I can see all cells while driving, but after I save it and view for adjustments...

I'm new to this yet and I added O2s for my next log...and yes, my steering shaft rubs the header and I have a rocker arm or 2 that's making contact with covers...Ill be throwing an 8.8 in it and...

Yea, thrw my $5 OBDII Bluetooth and Torq Pro app and saw Bank 2 wasn't oscillating so I threw a new O2 sensor in...BINGO!! look at this short log, way better

ok all Second shot at this,

05 CTS-V LS2 swap...I sent my file to a shop to make me a base tune so I can drive and learn HPT, the tune is AWESOME not 100% but that's what I asked for so I can...

I listen to all feedback, learned that growing up..I was planning on MAF tuning til I get comfortable with all of this anyhow, its a lot of info to take in and I wont learn it in a day...I'm just...

this is the type of feed back I need to learn so thanks! its a 366 ls2..some details are in my Sig.. I was excited to get HPT and I was moving too fast (eager to learn this) and after all the...

yea first time really posting on a forum attaching files...lol I'm trying to keep it at what its commanded to be at for now...as you can see I'm shifting very early and I'm not trying to rev past...

Hey all,

I want you all to look over my 1st ever attempt at this, I didn't go WOT because I have someone that's going to help me with that this weekend or next, I'm basically trying to get a...

Hey all, new guy here and this is my first question to the forum....I flashed a tune and finally got my wideband straightned out and I went to save the Data Log to post, I accidently saved it to the...

hey all! new guy from Mpls just learning the trade, haven't even connected my Pro interface to the vehicle yet..I'll thank you all in advance for you guidance. Mark