It happens when I get on it and during the run. It can just pull less but doesnt always pull less during the run.
Set all the TM back to the stock file I had for this car. Still does it.
Are...
Type: Posts; User: Jays68yak
It happens when I get on it and during the run. It can just pull less but doesnt always pull less during the run.
Set all the TM back to the stock file I had for this car. Still does it.
Are...
no one? Am I not explaining it right or no one has any idea?
2010 camaro system running crate 6.2 with 4l60 swapped in a chevelle.
Trying to tune the car on a dyno. Keep getting torque management advance that seems to be pulling timing. It can pull 1-10...
Trying to figure out this 6l80 tuning stuff. I think I have an issue with the trans coming out of WOT tables and going into part throttle tables while really high in the rpm range. This causes say a...
SOB The Maf was working fine now its not. It has a code...off to figure that one out.
On the 6l80 TM stuff...even if the engine trans is in a hot rod? Or it just messes with the shifting of the...
working threw a few issues...
First off on my last test drive I noticed that the trans TQ just drops off. It feels like the engine just falls on its face at that point. Which is leading me to wonder...
Correct, but then I changed the MAF curve after a few WOT checks and AFR correction.
Been struggling with this tune the last few days. 6.0 iron block, bored .030 over, flat top pistons, 243 heads, cam, springs, flipped truck intake, 8.1 marine injectors.
First it was the injectors...
I know this is an older thread...But how do you put it into paddle mode when the engine/trans are not in the original vehicle? The other fields where already set high. I am not able to control trans...
Working on a GMPP Crate ls3. I noticed that the fuel system goes from open loop to ol-accel/decel then after awhile it will go into closed loop. This is just sitting there idling. I can understand it...
Ls3 bottom end, AFR heads, cam, fast intake, in an off road car. Th400, no vss. Tuned several month back and customer said it would fall on its face sometimes. Never had an issue the 2 times I had it...
Care to share details on what it will do? Rinse dishes and AFR feeds for me? How does one go about making such a device without having to study the theory and design of electrical components? Not...
2004 ctsv, 5.7, small smog legal cam, fast 92 mm ls6 intake, volant air intake, stock throttle body, injectors cleaned and flowed.
I went through and did VE and MAF tuning per tuning school...
I figured it out. Started looking at the sensor to make sure it was wired correctly, unplugged it and someone filed a open spot into the plug to match the tang on the MAP sensor. Compared MAP sensor...
2005 corvette ls2. Just getting it setup on the dyno to start tuning it. Noticed the MAP is reading 100kpa at idle and under wot, its never moving. Engine running, if i unplug the MAP it kills...
I need a 04-07 lq4/manual file. The only thing I can find in the repository is 00-01.
So anyone?
Trying to flash a buddies truck tonight to delete the EGR stuff. Read the VCM, did what I needed to do and saved it. Tried to write but kept getting an error. "Request access failed. Unable to...
Im having the same issue with a truck i was trying to mess with tonight. Im on 2.23.485. Where can I download the newest version? My customer center is only showing 2.22.
*Edit* Just answered my...