Making progress, got my Wideband installed and started making an attempt at the VE tables. Going good so far, after a few data logs, VE adjustments, re-writes and driving the spark retard is going...
Type: Posts; User: 82SQRBDY
Making progress, got my Wideband installed and started making an attempt at the VE tables. Going good so far, after a few data logs, VE adjustments, re-writes and driving the spark retard is going...
I realized I had made the changes he suggested, but then un-did them with my new base tune. Still getting used to this stuff! Thank you for noticing that. I will make his corrections again, then will...
I just finished swapping a 6.0 into my 1982 K20. It was previously a LM7 with a SM465. It ran and drove great, I built a LQ4 with 862 heads and a stage 1 BTR Truck cam. I have only driven maybe 15...
The 5.3 was also using the SM465, no change other than Novak's correct swap flywheel to use a 12" clutch disc. The 5.3 ran great, no loss of power. It also had the automatic trans DTC's, it ran well...
I do not have EGR, or any other emissions component. Ill change those DTC's now. How do I turn off EGR, CAT and AIR?
I used the intake/injectors off of the 5.3. Universal cold air intake, long tube headers. Its a stock rebuild bottom end. I used a new crank, gen 4 rods and pistons but the same piston dish as LQ4. I...
I built a LQ4 that I got for free. It needed a complete rebuild has it has two seized rod bearings. I rebuilt with basically all new parts/bearings. I used a BTR Stage 1 truck cam kit, 863 4.8/5.3...