New PCM/TCM flashed factory FDRS and still same issue. No codes, nothing noticeable on the datalog. But the second its in gear the throttle is dead.
Type: Posts; User: Stangguy
New PCM/TCM flashed factory FDRS and still same issue. No codes, nothing noticeable on the datalog. But the second its in gear the throttle is dead.
Have a weird issue we can't seem to find a cure. Its a 2021 F150 5.0, we removed the whipple and used the whipple trackhawk tuner to flash back to stock. Truck idles fine fuel trims look fine....
Having a weird issue i can't trace down. Want to see if someone else has had this issue. 14 jeep 6.4l with a procharger on 8psi. Newly built motor. At high RPM triggering a p0300. Logged cylinders 7...
127350
Stock file supplied
I don't have the truck here at the moment for a log.
so try to have it reflash with a tech2 with the same OS?
Programmed by PSI originally. 12630501 is the OS that's being used. I don't have a tech2 to try to reprogram it.
TB data is stock for express van. This os is a 127lb
So what would cause the limp mode p0606 code. The Corvette APP works with that calibration? That's what it is, but the second you give it any serious throttle the P0606 code comes up.
Hey everyone. Had a customer bring in an old suburban running a L94 engine with a LSA blower with L94 tb, LS3 slot maf, Corvette throttle pedal, T42 TCM with a 4l80 trans. The calibration it was...
Got a customer coming in with a 5.4L 3v F150 with a roush kit. Has the delphi 38lb 25386328005 injectors. Need data. Does anyone have it? THanks.
Negative. Not sure if something got screwy in the tune.
Anyone got a hellcat flex fuel tune i can take a look at? Working out a problem on a car.
Was working on a flex tune for this hellcat and the thing started to do some weird stuff with the throttle. THere is almost no throttle response and then all of a sudden the throttle body will fly...
They are the 56lb injectors included with whipple kit. At least the number on them. I verified TB data as well. At least with other tunes.
Hey guys, built a base tune for a 17 mustang using some stock whipple tunes online to base off of and i can't get the thing to run. Starts and dies. It's got the 2.9L and billet throttle body on...
Got a frankenstein that i haven't come across before. its a 1967 mustang with a 2012 boss 302 motor in it with a GT350 manifold and throttle body. Goes into limp mode with p2135 and p2111. Its a...
it doesn't change that's what's throwing me for a loop. here is a log. You can tell when the clutch pedal is depressed93933 howd you tune around it?
3.6L Monmouth with monoblade. Doesn't this superheat the exhaust? Still weird how the second i press the clutch the spark drops to negative even though commanding around 20 and idle goes crazy. Air...
I had this GT500 motor come in with a bad motor. Low holes. Rebuilt the motor and went to tune it when i found a weird issue i've never seen before. Its a 2013 gt500 with a kenne bell, return fuel...
Anyone got a good procharger tune for this 2017 Z06 corvette D1sc M7 all stock besides that. Having a hell of a time getting the DD and torque tables right and bogs down on shift. 93052
2014 Silverado 5.3 with a whipple 10psi long tubes, catless, exhaust etc. Did a pull and everything looked good. Made a couple tweaks to maf, then second pull crazy lean. My high side is dropping...
Got this car that's a ls swap early camaro that does weird things. It'll stay in open loop not ready unless i force it. Also it stays open loop idle for a few seconds after you rev it. It won't make...
Hey got a 66 chevelle here with a ls in it trying to do a segment swap for a t56 from an auto on it and no matter what i do it won't rev over 2000rpm. Just bounces like crazy. Tried to do it manually...
its a full flow through return with boost ref. I've tried what Zinc was so kind to build and redid VE tables and even fattened it up a bunch to see if it made a difference. It didn't. I tried to...
Thanks bud.