Hey guys as title states, cant get around this problem at around 4300rpm complete power loss/shutdown....
Is there something I might be missing, where should I be looking... would it be a boost cut or torque cut of some sort have disabled all obviously limiters... cheers.
attached file
Evangea - Can you post a fresh log?
Hi Mate here is a Log file
Attachment 70649
Your desired boost is much lower than actual boost. Try lowering your wastegate duty cycle or raising your desired boost level
Im thinking it's an overboost issue I have zeroed the waste gate dc and put desired boost to 1 psi and the thing is still hitting 18psi can someone explain this only mods are stage 2 cooler cold air intake deleted blow off valve and a full twin 2.5 inch exhaust cant seem to keep the boost down on it till she hits a cut out at around 4300....
If you have a big dump & hiflow cat without wastegate porting you are going to have overboost issues.