Chart minimum

Back in the good ol' days all we had to work with was timing, fuel and air (for the most part).
Now a days there is all kinds of cool stuff to tune an engine.

What would be the most important things to have on the chart? Without the clutter.

This is where I'm at now.
Attachment 67993

I can't find AFR cmnd, MAF, MAP.

Think I found them.

Under Generic Sensors
Under Engine
Under air flow
Mass Airflow (mass flow rate)
And
Manifold Absolute Pressure (pressure)

Then
Under Fuel
Under Commanded/Desired
Air-Fuel Ratio Commanded

Attachment 68003

Don't know why I didn't see them earlier. Staring at the computer to long.:(


But I still would like to know what else is good, pretty please!

Knock retard, injector pulse width and duty cycle. O2 sensors, fuel trims.

I basically always run the default config for most things as it gives mostly all I need depending on what I'm doing.

Quote:

---

Originally Posted by 5FDP

Knock retard, injector pulse width and duty cycle. O2 sensors, fuel trims.

I basically always run the default config for most things as it gives mostly all I need depending on what I'm doing.

---

👍👍