I'm sure this is an easy one but how do you remove the ETC torque limit under a stall condition. Only happens with the brake on. When you press the throttle nothing happens until you release the brakes. E38 with 2 bar operating system.
Printable View
I'm sure this is an easy one but how do you remove the ETC torque limit under a stall condition. Only happens with the brake on. When you press the throttle nothing happens until you release the brakes. E38 with 2 bar operating system.
There is a Brake table in Tq Management that does this exact thing.
Should be Engine / Torque Management / General / Brake Torque Limit
Thanks this thread was somewhat helpful had this issue as well cant wait to try this fix