Help Changing Over Sct File To Hpt

I Have Two Files One Is Shelby Stock File Which Is A Back Up Of My Car And The Other Is The Tune From Kenne Bell Which Has The Wrong Cal Id I Would Really Appreciate If Someone Could Take A Look At Them And Maybe Someone Out There Can Change It Over I Tried But Values On Charts Starting To Not Line Up I Need The Shelby Stock File Updated With The Kenne Bell Values

Theres like 4 VCT tables that don't accept negative values so I just set them to 0 in those cells and one knock retard table that has a max neg. value setting of 15 but the ken bell file had it set to 19.x so I set that one to the max neg value of 15.

Everything else swapped over pretty easily though.

i really do appreciate your work on the this file but still no good i try to write it but i have no luck it says index out the bounds of array i have no clue what that means

You'll need the newest beta software to open the file I posted, if you email support your serial number we'll post it to your customer page.

thank you !!!!!!

well no wim a little overwhelmed on what i got my self into everytime i try to write the os is still the wrong os it fpafoa3 and the car is fpasau7 so i dunno what keeps happening but i do applogize for the annoying questions

Sorry I may have uploaded the wrong file, new one up in place of it.

thanks again you are great at what u do car runs great !!!!!!

Glad it worked out well...between you and me copying over the differences only takes about 20 seconds so it really wasn't much work lol ;)

Quote:

---

Originally Posted by 1078915694

I Have Two Files One Is Shelby Stock File Which Is A Back Up Of My Car And The Other Is The Tune From Kenne Bell Which Has The Wrong Cal Id I Would Really Appreciate If Someone Could Take A Look At Them And Maybe Someone Out There Can Change It Over I Tried But Values On Charts Starting To Not Line Up I Need The Shelby Stock File Updated With The Kenne Bell Values

---

Hi I have a 2005 mustang that has a sct with 4 tunes on it Is there any way I can

A- acquire the tunes from the sct

B- acquire the current tune on the car and modify it thus re install it with my HP Tuner .

I understand the sct files can be converted possibly

I dont want to brick anything so im looking for advice.

Thanks
Mike

1. Load SCT tune in car.(or read with HPTuners, if SCT tune is already loaded)
2. Read tune with HPTuners.
3. Reload stock tune in car.
4. Load next SCT tune.
5. Read tune with HPTuners.
6. Repeat until you have all tunes.


Remember to reload stock tune after each read.
Of course, this is only possible if the tunes are not locked/encoded.