Torque Management issues

Hey all,

I'm going to start pulling my hair out, after reading and referencing the FR for Simos8.5 repeatedly, I still cannot seem to get the bypass valve to close completely on my 207mm 3.0t. I've attached logs and my current file. Am I not seeing something obvious? I understand that I need to underscale the load and overscale the calculated torque. I'll take any advice or help yall have

Attachment 144934Attachment 144935

Quote:

---

Originally Posted by Only6NoTricks

Hey all,

I'm going to start pulling my hair out, after reading and referencing the FR for Simos8.5 repeatedly, I still cannot seem to get the bypass valve to close completely on my 207mm 3.0t. I've attached logs and my current file. Am I not seeing something obvious? I understand that I need to underscale the load and overscale the calculated torque. I'll take any advice or help yall have

Attachment 144934Attachment 144935

---

Engine torque looks low, also why only 85% tps?

I?ve only ever seen tps hit 85%. Engine torque does seem low, however I?ve tried everything between downscaling and upscaling torque and aircharge tables.

Have you got a current BIN file that you have flashed to the car, I can do a compare with mine , to see if anything is missing.

I dont have a modified bin, only HPT file with user defined parameters and my XDF?s I?ve been working on. I have PCMflash and WinOLS, that?s how I was able to get a map pack made for my specific car