2023 Outlander XXC rev limiting at 1400 RPM Notice and fix

So when tuning my Outlander I found that the last right cell causes the PCM to limit the RPM of the engine at 1400 RPM.
47258 - Torque Limitation for Battery Voltage, Variant 0
Attachment 136574
47259 - Torque Limitation for Battery Voltage, Variant 1
Attachment 139101
These are the best values Ive found to work at this point.

I think that last line is for something else and doesnt belong in that table. Even though its right in line with it in the Hex Addressing. Notice the RPM value is way out of whack.

I have re mapped most all of the tables to 9000 RPM

Update the first post with my latest findings to help others.

I have not tried slowly increasing the values as im not sure what it is exactly that they are effecting.

Feel free to post any of your own experiences or findings on this.

The XCIPTV interface is user-friendly, boasting simplicity alongside advanced functionalities like backup and restore, as well as synchronization across multiple devices.


XCIPTV Player

Quote:

---

Originally Posted by HellKnightHicks

So when tuning my Outlander I found that the last right cell causes the PCM to limit the RPM of the engine at 1400 RPM.
47258 - Torque Limitation for Battery Voltage, Variant 0
Attachment 136574
47259 - Torque Limitation for Battery Voltage, Variant 1
Attachment 139101
These are the best values Ive found to work at this point.

I think that last line is for something else and doesnt belong in that table. Even though its right in line with it in the Hex Addressing. Notice the RPM value is way out of whack.

I have re mapped most all of the tables to 9000 RPM

---

here is how i tuned a couple of them is very simple
Attachment 144229

On the 2023 I was working on if the cells were not as I described. RPMS would no go above 1400. Its the only machine ive seen it happen on. Just thought it may help others if they experience the same thing.